Pontec PE 250 Litre Preformed Pond

Product Code: 36767 EAN: 4010052367675

(3.5) Based on 2 Reviews

Description

 

A 250 Litre Preformed Pond which can easily be installed in your garden to give you a great feature.

The build of this pond is very strong and it will withstand both UV rays from the sun and icy weather too.

Complete with shelves so that the pond can be filled with aquatic plants.

Pond Dimensions

135cm Length x 92cm Width x 54cm Depth.

Product Weight

3.6kg.

PE 250 Capacity

250 Litres / 55 Gallons.

Delivery Information

FREE Mainland UK* Delivery on orders over £40.00.
or £4.95 Delivery on Orders Under £40.00.
 £6.95 Next Working Day Delivery.

 *Additional delivery charges may apply to the following destinations: Isle of Wight, Isles of Scilly, Northern Ireland, Republic of Ireland and Scottish Highlands. Please contact us for a customised delivery quote.

If you need spare parts for your Oase then visit our Oase Spares page.
FREE Mainland UK* Delivery on orders over £40.00.
or £4.95 Delivery on Orders Under £40.00.
£6.95 Next Working Day Delivery.

 *Additional delivery charges may apply to the following destinations: Isle of Wight, Isles of Scilly, Northern Ireland, Republic of Ireland and Scottish Highlands. Please contact us for a customised delivery quote.

Customer Reviews

Overall Rating 3.5 / 5 Based On 2 Reviews

Delivery 4 / 5
Quality 4 / 5
Price 4 / 5

Good value pond

Looks like a version of the more expensive Oase PE250 pond. Edge lip is good for lots of small pots of marginals which along with some boulders should hide the edge eventually. Delivery was fine, could not get the address label off though and it was stuck to the interior shelf,can hardly notice it now. Looks like good quality durable plastic which should last a while.

By Chris.
15th, May, 2017.

Delivery 3 / 5
Quality 3 / 5
Price 3 / 5

pond too thin and flimsy, not >2mm as stated

Good shape and shelving, the pond thickness is not as stated and has little rigidity. As this pond is recommended for in ground installation then this is to be excused but the wall thickness as stated in excess of 2mm was the main reason for this purchase and I am a little disappointed.

By martin walker.
15th, May, 2017.

Questions and Answers (4)

Patti Taylor Asked:

What would you recommend to go underneath the Pontec Preformed Pond? Should we just fill the escavated hole with sand or earth or should we put in a liner?

We Replied:

Dear Patti Thank you for your question. I'd advise you read my guide on installing preformed ponds: /blog/guides/how-to-install-a-preformed-pond This should give you all the information that you require. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. kind regards Andy Hobson

Thursday 05th, June, 2014
abi Asked:

I want to buy the Pontec PE 250 Litre Preformed Pond. However, I don't want to put it into the ground. Would it just stand without falling on my deck?

We Replied:

Dear Abi Thank you for your question. Without support these ponds will not stand without support. if you desired a free standing effect you would be required to build a supporting frame around the pool and also back fill the surround with soil to fully support the whole pond. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Paul Ilsley

Saturday 18th, July, 2015
mark Asked:

I am planning to use this as a duck pond, however if I dig down about 1ft there is solid chalk. Could you advise me on a solution to this problem, should I perhaps build a wooden support frame for the pond ?

We Replied:

Dear Mark, Thank you for your question. We only recommend using this pond as a below ground installation. if you were to install this above ground it would require a retaining wall, the void behind it to be back filled, and full support provided in all areas. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind Regards Dan Everton

Tuesday 20th, October, 2015
Martin ford Asked:

Has this pond got an overflow spout as i wish to use this it as a feeder to my main pond?

We Replied:

Dear Martin Thank you for your question. As this is designed as a standalone pool it does not have an overflow fitted. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Dan Everton

Monday 08th, August, 2016

Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.

Ask us a Question