There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
Austin Stainless Steel Water Feature
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: WSS0540 EAN: 5060282494893
Using the same eye catching design and materials as the Dallas water feature, this one - named after the Lone Star state's capital - is 10cm taller.
The Austin Water Feature again relies on the simple reflective qualities of stainless steel and water to create a wonderful shimmering curtain.
A contemporary feature that can be installed very simply, it has an undoubted visual impact that stems from clean straight lines and smooth surfaces.
Indoors or outside, this is a really contemporary piece, highly decorative but not in the least ornate. A pump is included as well as 10 metres of cable.
- Suitable for both indoor and outdoor use
- Complete with mains powered pump
- 10m cable included
- Easy installation with instructions supplied
- Height: 40cm (1ft 4ins)
- Width: 17cm (7ins)
- Depth: 8cm (3ins)
- Weight: 3kg (6lb 10oz)
£4.95 delivery on orders under £50.00.
We have over 50 Years Experience in water gardening & one of the Largest Aquatic Centres in the UK. Open 7 days a week.
Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.
For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.
For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.
Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.
Questions and Answers
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question