There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
Dallas 30cm Water Blade
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: WSS0530 EAN: 5060282494886
Contemporary in every sense, the Dallas 30cm Water Blade is as stylish and gleaming as the eponymous Texan city.
The stream of water glistens as it pours from a stainless steel tray, forming a delightful curtain that shimmers and shines.
With a recessed underside and back connections, this 30cm wide water blade allows you to create your own feature at home.
- 30cm Length Water Blade
- Ready to Install Into a Water Feature at Home
- Indoor or Outdoor Use
- Constructed from Stainless Steel
- Recessed Underside for Easy Fitting
- Integral Back Connections
- Optional LED Lighting Strip Available Below
- Optional Water Pump Available Below
- Length: 30cm (12ins)
- Width: 17cm (7ins)
- Depth/Height: 8cm (3ins)
- Weight: 2kg (4lbs 7oz)
Note: Includes water blade only, water feature imagery is for the demonstration of an example setup.
Select Your Options
Do You Require A Reservoir?
Do You Require A Water Pump?
Add a compatible fitting pump to your water blade with our recommended pumps below. The pump capacity should be chosen to match your needs, flow rate, flow height, blade width and height to ensure a sufficient flow.
Note: These pumps do not come with a 3-pin plug as standard and so will need to be wired in.
Do You Require Any Lighting Accessories?
Fast Free Delivery within Mainland UK and Ireland for Orders over £40.00.
Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.
For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.
For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.
Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question