Adelaide Stainless Steel Water Feature

Product Code: WSS1222 EAN: 5060282491892

Write the first review

Description

The stunning Adelaide water feature will grace any garden, patio or home.

This is a contemporary design with the shining stainless steel sphere contrasting with great effect against a black granite style base.

Due to the cluster LED this is a piece that can be enjoyed at night as well as during the day as water shimmers over the sphere and collects in the reservoir ready to be recycled.

No mains supply is required as this feature is self-contained.

Adelaide Stainless Steel Features:

Suitable for outdoors and indoors.
Cluster LED
Mains pump
10m cable

Adelaide Water Feature Dimensions:

Height: 45cm (18ins)
Width: 31cm (12ins)
Depth: 31cm (12ins)
Weight: 16.5kg (36lbs)

Lit by a cluster LED light and the soothing atmosphere of the water gently bubbling and shimmering down to the reservoir below this beautiful stainless steel self-contained water feature will be an eye catcher in your garden. The high quality stainless steel used in its construction means the impressive detailing is kept to a manageable weight.

Key Features

Suitable for use outdoors or indoors

Self-contained

1 Cluster LED

Made from high quality stainless steel

Lightweight enabling easy transportation

Specification

1000mm (w) x 1000mm (d) x 1160mm(h)

Weight 32kg

Includes

Water feature and Pebble pool

Cluster LED

Pump with 10m of cable

Delivery Information

FREE UK DELIVERY on orders £50.00 or more.
£4.95 delivery on orders under £50.00.

All orders are acknowledged with a written receipt of purchase and you will be contacted prior to delivery. Delivery will normally be made within 5 working days from receipt of your order, though this may vary throughout the season. Please contact us now if delivery time is critical. All Sizes are approximate and for guidance only. Additional Delivery costs may apply for certain locations for example Isle of Wight.

We have over 50 Years Experience in water gardening & one of the Largest Aquatic Centres in the UK. Open 7 days a week.

Important Safety Information on Water Features for Garden and Outdoor Use

This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.

For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.

For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.

Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.