Kelkay Easy Fountain Small Protection Cover (4573)A protection cover will keep your fountain or water feature safe from frost and ice during the winter and keep it clean too. Ideal to prevent rain from getting into the feature and then freezing causing damage. Ideal for the Henri Studio range of fountains.
Luxury Lined Fountain Protection Cover - Small (4574)These luxury and lined fountain protection covers from the KelKay range of EasyFrountain products provides a high-quality protection for your water feature over the colder months.
Henri Studio - Millstone Fountain
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: H5620F3LRS EAN: 5055066409903
Henri Studio is renowned around the world for beautiful, original designs, created and meticulously refined by Henri sculptors.
Each Henri piece is then molded, cast and finished by hand, in the tradition of Old World artisans.
In colour Relic Sargasso.
Millstone Fountain Features:
- Quality hand cast stone fountain
- Ideally placed in the centre of a paved or deck area
- Displayed in Relic Sargasso colour
- Low maintenance
- Quality high performance pump
- Large bubbling effect at the top of the fountain
- 10m of cable with the pump
- Made up of 3 seperate pieces which fit together
- Includes LED light.
- Total Height: 76cm
- Diameter: 91cm
- Base Diameter: 60cm
- Weight: 244kg
May We Also Suggest
FREE Mainland UK* Delivery on orders over £40.00.
or £4.95 Delivery on Orders Under £40.00.
£6.95 Next Working Day Delivery.
*Additional delivery charges may apply to the following destinations: Isle of Wight, Isles of Scilly, Northern Ireland, Republic of Ireland and Scottish Highlands. Please contact us for a customised delivery quote.
With over 30 years experience Andrew is your direct contact for all of the Henri range of products. Contact him now via e-mail or telephone 0121 355 7701 to discuss your requirements.
This product is a part of the Henri Core Range and is held in stock within the UK therefore Delivery should normally be made within 7 working days from receipt of your order. All deliveries will be booked in first by the carrier.
Overall Rating 4.3 / 5 Based On 1 Reviews
Delivery 4 / 5
Quality 4 / 5
Price 5 / 5
A water feature that's a bit different
We knew it was going to be heavy but once in place this water feature is very impressive and well worth the effort. Great communication from gardensite. Will use them again and buy this feature again if we wanted two.
By Charles, Wolverhampton.
30th, July, 2015.
Questions and Answers (7)
Kevin Hoines Asked:
Is the water reservoir the larger bottom part of the millstone? If so how much does it hold?We Replied:
Dear Kevin Thank you for your question. You are correct, the reservoir is found in the base of the feature and the fountain holds approximately 100 - 125 litres. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Dan EvertonFriday 20th, March, 2015
Nicola Smith Asked:
Can you confirm that the measurements and particularly the weight of this item are correct? We live up a steep drive which a large delivery vehicle is not able to access, so we are concerned about it getting it to us! Would the small fountain cover you advertise on the same page be big enough?We Replied:
Dear Nicola Having had this water feature in our garden centre aquatics department we can say that it is a heavy item. The item is delivered on a pallet but the large bowl section is 91cm wide and would take two strong people to lift or roll. This water feature comes in around 4 sections. Please call Andrew Hall our Henri expert if you require further help on 0121 355 7701. The small cover will fit. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Nathan James DoddSunday 26th, April, 2015
Kevin Richards Asked:
What size water pump does the Henri Studio Millstone require?We Replied:
Dear Kevin Thank you for your question. This fountain would usually require a HSFP3 pump but, as Henri have stopped producing these pumps, the alternative is a Bermuda 2100: /Aquatics/Bermuda_2100_Feature_Pump.htm Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Paul IlsleyThursday 25th, June, 2015
Richard Hannant Asked:
We have one of your millstone water features and would like to obtain a new water bung The one we have has become damaged during various draining operations, where can we get one please?We Replied:
Dear Richard Thank you for your question. There are two bungs within this fountain, the drain plug and the rubber cable bung with metal plates. At the moment we only have the drain plug in stock please see link below: /Aquatics/Henri_12ins_Drain_Plug.htm Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Paul IlsleyMonday 24th, August, 2015
John Salt Asked:
Do you stock the smaller mill stone water feature?We Replied:
Dear John Thank you for your question. Please follow this link: /Aquatics/henri-studio-small-millstone-fountain.htm Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Dan EvertonWednesday 17th, August, 2016
Heather Britton Asked:
Is the small protective cover big enough for the large Henri Millstone water feature?We Replied:
Dear Heather Thank you for your question. I can confirm that the small protective cover is suitable for the large Millstone Fountain. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards LaurenSunday 01st, January, 2017
What is the diameter of the base stand?We Replied:
Dear Ken Thank you for your question. The base dimensions are approximately 600mm (24ins) wide and 600mm (24ins) deep. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards LaurenMonday 22nd, May, 2017
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question
£679.99 inc. VAT
Sorry, this item is out of stock.