Kevin Hoines Asked:
Is the water reservoir the larger bottom part of the millstone? If so how much does it hold?
We Replied:
Dear Kevin
Thank you for your question.
You are correct, the reservoir is found in the base of the feature and the fountain holds approximately 100 - 125 litres.
Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system.
Kind regards
Dan Everton
Friday 20th, March, 2015
Nicola Smith Asked:
Can you confirm that the measurements and particularly the weight of this item are correct? We live up a steep drive which a large delivery vehicle is not able to access, so we are concerned about it getting it to us! Would the small fountain cover you advertise on the same page be big enough?
We Replied:
Dear Nicola
Having had this water feature in our garden centre aquatics department we can say that it is a heavy item. The item is delivered on a pallet but the large bowl section is 91cm wide and would take two strong people to lift or roll. This water feature comes in around 4 sections. Please call Andrew Hall our Henri expert if you require further help on 0121 355 7701. The small cover will fit.
Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system.
Kind regards
Nathan James Dodd
Sunday 26th, April, 2015
Kevin Richards Asked:
What size water pump does the Henri Studio Millstone require?
We Replied:
Dear Kevin
Thank you for your question.
This fountain would usually require a HSFP3 pump but, as Henri have stopped producing these pumps, the alternative is a Bermuda 2100:
https://www.gardensite.co.uk/Aquatics/Bermuda_2100_Feature_Pump.htm
Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system.
Kind regards
Paul Ilsley
Thursday 25th, June, 2015
Richard Hannant Asked:
We have one of your millstone water features and would like to obtain a new water bung The one we have has become damaged during various draining operations, where can we get one please?
We Replied:
Dear Richard
Thank you for your question.
There are two bungs within this fountain, the drain plug and the rubber cable bung with metal plates. At the moment we only have the drain plug in stock please see link below:
https://www.gardensite.co.uk/Aquatics/Henri_12ins_Drain_Plug.htm
Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system.
Kind regards
Paul Ilsley
Monday 24th, August, 2015
John Salt Asked:
Do you stock the smaller mill stone water feature?
We Replied:
Dear John
Thank you for your question.
Please follow this link:
https://www.gardensite.co.uk/Aquatics/henri-studio-small-millstone-fountain.htm
Should you wish to contact us further or to place an order, please call us on 0121 355 7701.
Thank you for using our online Q&A system.
Kind regards
Dan Everton
Wednesday 17th, August, 2016
Heather Britton Asked:
Is the small protective cover big enough for the large Henri Millstone water feature?
We Replied:
Dear Heather
Thank you for your question.
I can confirm that the small protective cover is suitable for the large Millstone Fountain.
Should you wish to contact us further or to place an order, please call us on 0121 355 7701.
Thank you for using our online Q&A system.
Kind regards
Lauren
Sunday 01st, January, 2017
Ken Asked:
What is the diameter of the base stand?
We Replied:
Dear Ken
Thank you for your question.
The base dimensions are approximately 600mm (24ins) wide and 600mm (24ins) deep.
Should you wish to contact us further or to place an order, please call us on 0121 355 7701.
Thank you for using our online Q&A system.
Kind regards
Lauren
Monday 22nd, May, 2017
Julia Nixon Asked:
Where is the main drainage bung on the large Henri Millstone Water Fountain please?
We Replied:
Dear Julia
Thank you for your question.
The main drainage bung can be found on the lowest (biggest) dish on the fountain. It can normally be found behind the access area for the pump.
Should you wish to contact us further or to place an order, please call us on 0121 355 7701.
Thank you for using our online Q&A system.
Kind regards
Connor Fisher
Monday 05th, June, 2017
Have a question for this product?
Go ahead and ask us!
We try to reply within a few hours but it may take longer on some questions.