There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
Connecticut Rock Falls Water Feature
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: PWFD1618 EAN: 5060558140325
It's doubtful whether you'll find too many other water features as eye catching as the Connecticut Rock Falls with streams of glittering water spilling spectacularly from several rock pools.
Polyresin convincingly replicates the moss covered rock which has been so expertly hand finished in great detail, and LEDs add drama to the scene by brightly highlighting the water collecting in various crevices.
The feature is fully self contained, no external water supply is needed, and because it is supplied with a ten metre power cable and low voltage transformer, there is a wide choice of locations both in the home and outside.
Connecticut Rock Falls Features:
- Lit With LEDs
- Fully Self Contained
- Constructed From Durable Polyresin
- Hand Finished
- Complete Kit Included
- Low Maintenance
- Low Voltage Transformer & Plug
- 10m Of Cable
- Height: 133cm (4ft 4ins)
- Width: 66cm (2ft 2ins)
- Depth: 104cm (3ft 5ins)
- Weight: 66kg
We advise that you always drain water features during the winter to prevent the water inside freezing and damaging the feature. The best way to protect your fountain is to use a protection cover.
Fast Free Delivery within Mainland UK and Ireland for Orders over £40.00.
Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.
For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.
For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.
Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question