There are currently no reviews for this product. Please help us and others by writing a review.
Review This Product


Water streams over this substantial but lightweight feature that is a convincing portrayal immaculately crafted from polyresin, and is suitable for indoor and garden use.
The effect that this wonderful self-contained ornament creates is augmented by cluster LEDs that light the water's sparkling progression from the top to the reservoir at the base ready to be pumped back.
Large Boulder River Falls Features:
- Suitable for outdoors and indoors.
- Fully self-contained reservoir
- Polyresin
- Highly durable
- Mains powered pump included
- 3 Cluster LEDs
- 10m cable
- 12 month warranty
Dimensions:
- Height: 72cm (28ins)
- Width: 150cm (59ins)
- Depth: 67cm (26ins)
- Weight: 47 kg (104lbs)
PDF Downloads
Fountain Assembly Instructions
Fast Free Delivery within Mainland UK and Ireland for Orders over £40.00.
Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.
For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.
For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.
Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.
Does this feature have a protective cover?
We Replied:Dear Gerard Thank you for your question. Unfortunately, we do not supply a protective cover for this water feature. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Lauren
Saturday 02nd, September, 2017Do you have to build up the ground so it supports the feature at the highest level or is it self supporting?
We Replied:Dear David Mossman, Thank you for your question. This feature is self supporting and doesn't need ground build up to support the top. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind Regards Lauren
Sunday 31st, May, 2020Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.
Ask us a Question