Replacement opening vent, or simply opening window kit, suitable for Halls 8ft wide greenhouse range.
If you want to add an additional opening roof vent for your 8ft wide Halls greenhouse this kit is all you need. It replaces an existing piece of 610mm x 610 mm glass in the roof. If you have long pane toughened glass in the roof you will have to buy a shorter piece of toughened glass for the section below the new vent this should measure 610 x 1018.
Adding an additional vent improves the flow of air through the greenhouse which is paramount in the summer months to stop rot and fungus on your precious crops.
How to Fit a Replacement Roof Vent
Fitting them is straight forward. In essence you have to remove a panel of the existing glass (610mm x 610mm) and slide in the opening roof vent when you have screwed it together. The removed glass CANNOT be transferred into the new opening vent you will need to have a glazier cut a piece to size 610 x 559. Comprehensive installation instructions are supplied with the unit as well as a full glazing plan. Note: the opening vent is not supplied with glass.
Delivery
Fast mainland UK delivery. We also send these vents out around the world, so if you are not in the UK please use the QUESTIONS & ANSWERS tab near the foot of this page and request a postage quote.
Should you require any additional information please feel free to call us, 7 days a week on 0121 747 3046.
Specification
Brand: |
Halls |
Type: |
Ventilation |