There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
Solar Finial on Pillar Water Feature
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: PWF3719 EAN: 5060282496361
The Solar Finial on Pillar by Aqua Creations is a classic water feature that would make a beautiful centrepiece in your garden.
Made from strong and durable polyresin means that the feature is suitable for outdoor use; it will offer you enjoyment and pleasure for years to come.
The water is pumped up through the column where it bubbles at the top of the upside down acorn style finial and then cascades down the surface of the finial into the bowl.
- Hand finished
- Child & Pet safe
- Easy assembly
- Fully self-contained
- UV and frost resistant
- Designed for outdoor use
- Height: 69cm
- Width: 44cm
- Length: 44cm
- Weight: 9kg
- Light(s): N/A Solar
Smaller orders under £40.00 are subject to a £6.95 delivery charge. Delivery will typically be made within 3 - 5 working days but may be extended during busy times of the year. Extra charges will apply to certain locations for example Isle of Wight and Islands. In some cases we can even deliver outside the mainland e.g. Channel Isles and arrange the VAT element for you. In all instances please contact us today for a personalised quote.
Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.
For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.
For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.
Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.
Questions and Answers (1)
How long should it take to charge up fully to enable the equipment to work? At what stage should the feature be filled with water? Are the four batteries needed initially and where do they go?We Replied:
Dear John Thank you for your question. The batteries need installing into the back of the panel first. Charge these overnight plugged into the mains. The feature can be filled with water at any stage. When the item is fully charged will obviously depend on the strength of the sun and how low a charge the batteries have at the time. /pdfs/solar-instructions-ee87db2618a9dca8edf40232093d18f8.pdf Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards LaurenSaturday 06th, April, 2019
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question