There are currently no reviews for this product. Please help us and others by writing a review.
Review This ProductKissing Boy & Girl at Lamp Water Feature
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: PWFS6156 EAN: 5060282492868



Young love is charmingly portrayed by this self-contained water feature. The two youngsters look to be sharing an affectionate kiss under the lamppost, with the boy coyly holding flowers behind his back.
Water pours from a tap in the middle of them into a bucket, and the entire scene will be enhanced by cluster LEDs. A delightful decorative feature made from high quality and extremely durable polyresin.
Kissing Boy & Girl at Lamp Features:
- Fully self-contained reservoir
- Mains powered pump
- High quality polyresin
- Suitable for outdoors and indoors
- 2 Cluster LEDs
- 10m cable
- 12 month warranty
Dimensions:
- Height: 96cm (38ins)
- Width: 46cm (18ins)
- Depth: 27cm (11ins)
- Weight: 13kg (29lbs)
PDF Downloads
Fountain Assembly Instructions
Fast Free Delivery within Mainland UK and Ireland for Orders over £40.00.
Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.
For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.
For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.
Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.
Ask us a Question