There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
4 Fall Jagged Falls Water Feature
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: PWFD0012 EAN: 5060282492462
The 4 Fall Jagged Water Fountain will greatly enhance your home, patio or garden with its striking natural style. Resembling a waterfall from a rugged mountain side, cluster LEDs light it dramatically in the evening.
Polyresin re-creates stone very realistically and is also very durable if located outside. The feature is self contained for ease of use, and all that's required is a power supply.
4 Fall Jagged Falls Features:
- Outdoors or indoor use
- Fully self-contained reservoir
- Mains powered pump included
- 4 Cluster LEDs
- 10m cable
- 12 month warranty
- Height: 102cm (40ins)
- Width: 54cm (21ins)
- Depth: 49cm (19ins)
- Weight: 24kg (53lbs)
£369.99 inc. VAT
Sorry, this item is out of stock.
Fast Free Delivery within Mainland UK and Ireland for Orders over £40.00.
Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.
For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.
For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.
Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question