There are currently no reviews for this product. Please help us and others by writing a review.
Review This ProductStainless Steel Water Blades 30 - 120cm
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Description
Water blades allow you to create a really unique, stunning water feature within your home or garden, based on seamless streams of water cascading down from the polished steel waterfall blade.
Crafted from stainless steel, they're not only strong, hard wearing and resistant against all weather conditions, but the shiny, polished steel only adds to the shimmering effect produced from the water flowing off the edge, down into a pool or reservoir below.
Popular with landscape gardeners and home designers, waterfall blades allow you to create your own custom water feature at home using already present features, such as an outer wall for where a water blade could be positioned, a pond for where the water can fall into or to create your own ensemble from scratch.
At the back of each water blade, you'll find integral connections ready to connect up to a suitable pump, while the recessed underside allows for easy placement into a variety of installations.
Water Blades Features:
- Lengths from 30cm to 120cm Available
- Ready to Install Into a Water Feature at Home
- Indoor or Outdoor Use
- Constructed from Stainless Steel
- Recessed Underside for Easy Fitting
- Integral Back Connections
- Optional LED Lighting Strip Available Below
- Optional Water Pump Available Below
Dimensions:
- Available Lengths: 30cm, 40cm, 50cm, 60cm, 90cm or 120cm (choose below)
- Width: 17cm (7ins)
- Depth/Height: 8cm (3ins)
Prices from £74.99 - £179.99
Select Your Options
Please Choose Your Water Blade Length
as 30cm Length Water Blade (WSS0530)
Length: 30cm
Width: 17cm
Depth/Height: 8cm
as 40cm Length Water Blade (WSS0540)
Length: 40cm
Width: 17cm
Depth/Height: 8cm
as 50cm Length Water Blade (WSS0550)
Length: 50cm
Width: 17cm
Depth/Height: 8cm
as 60cm Length Water Blade (WSS0560)
Length: 60cm
Width: 17cm
Depth/Height: 8cm
as 90cm Length Water Blade (WSS0590)
Length: 90cm
Width: 17cm
Depth/Height: 8cm
as 120cm Length Water Blade (WSS5120)
Length: 120cm
Width: 17cm
Depth/Height: 8cm
Do You Require A Water Pump?
Add a compatible fitting pump to your water blade with our recommended pumps below. The pump capacity should be chosen to match your needs, flow rate, flow height, blade width and height to ensure a sufficient flow.
Note: These pumps do not come with a 3-pin plug as standard and so will need to be wired in.
with 2000LPH 35W Pump (PF-2000HV)
Flow Rate: 2000 lph
Max Head Height/Lift: 245cm
Power: 35W
Cable Length: 10m
with 3000LPH 50W Pump (PF3000HV)
Flow Rate: 3000 lph
Max Head Height/Lift: 250cm
Power: 50W
Cable Length: 10m
with 5000LPH 70W Pump (PF5000HV)
Flow Rate: 5000 lph
Max Head Height/Lift: 300cm
Power: 70W
Cable Length: 10m
Do You Require Any Lighting Accessories?
Match your chosen water blade length to the same LED lighting strip length to create an illuminated feature. Transformers are available separately if you don't have a power connection for the lighting already.
with 30cm LED Lighting Strip (ACWBS30)
with 40cm LED Lighting Strip (ACWBS40)
with 50cm LED Lighting Strip (ACWBS50)
with 60cm LED Lighting Strip (ACWBS60)
with 90cm LED Lighting Strip (ACWBS90)
with 120cm LED Lighting Strip (ACWBS120)
with Transformer (PT-10VA)
If you don't have a spare power connection already, this transformer will provide power to the LED lighting strip.
Length: 2m with UK Plug
Rating: IP64
Input: 240v
Output: 12v
In Stock
Delivery Information
Fast Free Delivery within Mainland UK and Ireland for Orders over £40.00.
Smaller orders under £40.00 are subject to a £6.95 delivery charge. Delivery will typically be made within 3 - 5 working days but may be extended during busy times of the year. Extra charges will apply to certain locations for example Isle of Wight and Islands. In some cases we can even deliver outside the mainland e.g. Channel Isles and arrange the VAT element for you. In all instances please contact us today for a personalised quote.
Important Safety Information
This product should not be exposed to extreme weather conditions. It is recommended that the product is drained completely and covered during the winter with a suitable protection cover, or alternatively drained and placed inside a garden shed, storage box or stored indoors.
These water features, unless stated as being solar-powered, or unless otherwise stated are provided with a UK 3-pin standard plug. The plug section of the water feature kit is not weatherproof and so will need to either be plugged inside a socket inside the home, with the wire being fed out into the garden, or used in conjunction with an outdoor weatherproof socket or dribox.
For safety - the installation of outdoor weatherproof sockets and driboxes should be installed and tested by a qualified electrician.
Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.
Questions and Answers (3)
Mark Asked:
What is the size of the connection at the rear of the 50cm blade unit?
We Replied:Dear Mark Thank you for your question. This blade comes with a couple of different connection sizes/adapters. One of these is approx. 1¼in so should be compatible with the 32mm hose and a jubilee clip. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Lauren
Thursday 05th, September, 2019
Scott boulton Asked:
What size pump do I need? What 3m x 3m pond liner do you recommend?
We Replied:Dear Scott Thank you for your question. For a 1m+ height, we would recommend the 5000lph pump to give adequate flow. The smallest liner we have is 3mx4m, follow this link to the range: https://www.gardensite.co.uk/aquatics/gordon-low-heavy-duty-pvc-pond-liner-05mm-prepack.htm Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Lauren
Thursday 14th, May, 2020
Lewis Asked:
I have a 120cm blade, height is 1.6, what size pump and reservoir would you suggest?
We Replied:Dear Lewis Thank you for your question. As for the pump - given the height, we would suggest a pump with at least 6000LP such as this: https://www.gardensite.co.uk/aquatics/blagdon-amphibious-iq-6000-12000-pond-pump.htm In regards to a reservoir, the largest we supply is a 115cm circle reservoir, which would not be big enough for the 120cm length blades. So we would suggest going for an excavated ditch with a PVC/EPDM liner or using a glass fibre preformed pond, the shape and size of which would depend on your setup location and requirements: https://www.gardensite.co.uk/aquatics/preformed-ponds/ Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system Kind regards Lauren.
Wednesday 31st, March, 2021Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.
Ask us a Question
