There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
Paphos Water Wheel Water Feature
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: PWFH4513 EAN: 5060282496279
A classic Cypriot style house combined with a traditional mill wheel.
The Paphos Water Wheel by Aqua Creations is carefully crafted from polyresin which is lightweight yet durable so the water feature is suitable for indoor and outdoor use, even around children and pets.
Installation is easy, there is no digging required because it is fully self contained so you just connect the pump and add water.
The water is then pumped to the top of the feature and flows down each ledge into the reservoir below which is lit by a warm LED light. At the same time the movement of the water makes the mill wheel spin. This blend of light, sound and movement creates a relaxing atmosphere, especially at night.
- Hand Finished
- Pump with 10m Cable Length
- Fully self-contained water feature
- Low voltage transformer and plug
- Suitable for indoor or outdoor use
- Low maintenance and low running costs.
- Height: 91cm
- Width: 49cm
- Length: 48cm
- Weight: 13kg
- Light(s): 1x Single LED
Smaller orders under £40.00 are subject to a £6.95 delivery charge. Delivery will typically be made within 3 - 5 working days but may be extended during busy times of the year. Extra charges will apply to certain locations for example Isle of Wight and Islands. In some cases we can even deliver outside the mainland e.g. Channel Isles and arrange the VAT element for you. In all instances please contact us today for a personalised quote.
Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.
For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.
For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.
Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.
Questions and Answers
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question