Adam Ward Asked:
What size of outlet hose (ID and OD) does the TMC V² PowerPump 800 use? I would like to use this for water changes and would like to pruchase a hose long enough to go from my RO storage barrel to my display tank and need to know what size of hose to buy.
We Replied:
Dear Adam
Thank you for your question.
Due to the size of the 800 it will only accept a 12mm ID Pipe.
Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system.
Kind Regards
Dan Everton
Wednesday 30th, September, 2015
Steve. Asked:
So that I can check if it fits in my sump, what are the physical dimensions of the TMC V2 Powerpump 3000 model code 9004?
We Replied:
Dear Steve
Thank you for your question.
The dimensions are as follows:
16cm (length) 11cm (height) 10.5cm (depth)
Should you wish to contact us further or to place an order, please call us on 0121 355 7701.
Thank you for using our online Q&A system.
Kind regards
Dan Everton
Sunday 27th, December, 2015
Manvydas Asked:
Which model will fit a 16/22mm hose?
We Replied:
Dear Manvydas
Thank you for your question.
The 1300 and 1500 models have 20mm hosetails.
Should you wish to contact us further or to place an order, please call us on 0121 355 7701.
Thank you for using our online Q&A system.
Kind regards
Dan Everton
Sunday 06th, March, 2016
Tong Naylor Asked:
I have a V2 Skim Pro 900 but the pump is not working. Could you recommend a replacement?
We Replied:
Dear Tong
Thank you for your question.
You require a 600 lph pump, the smallest we have is the 800 version but this can be turned down to suit.
Should you wish to contact us further or to place an order, please call us on 0121 355 7701.
Thank you for using our online Q&A system.
Kind regards
Dan Everton
Thursday 21st, June, 2018
Have a question for this product?
Go ahead and ask us!
We try to reply within a few hours but it may take longer on some questions.