There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
6ft x 4ft Traditional Apex Garden Shed
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Ever popular, the traditional apex shed is a familiar sight in gardens, whether large or small, throughout the entire country.
It has many uses, perhaps keeping a mower dry or protecting other garden equipment is the most common, hence the reason it sells so well and has done for many years.
If you have expensive tools and equipment it's only sensible to look after them, and this sturdy 6ft x 4ft shed from Hall's is robustly built to stand up to our unpredictable weather.
The lockable door is ledged, braced and fitted with zinc hinges and a D handle. Once inside you'll also notice how light it is, due to the horticultural glazing.
Good quality roofing felt is used to keep the interior waterproof, a pleasant place to work and secure if you're using it for storage.
Traditional Apex Shed Features:
- Ledged and braced door
- Lock and key
- Zinc hinges
- D handle
- Durable roofing felt
- Horticultural glazing
- Tongue & Groove Floor and Cladding
- All framing corners are rounded off
- Dip treated
6ft x 4ft Apex Shed Dimensions:
- Nominal size: 6ft deep x 4ft wide (1.83m x 1.22m)
- Framing: 38mm x 50mm (1½ins x 2ins)
- Eaves height: 1680mm (5ft 6ins)
- Ridge height: 1985mm (6ft 6ins)
- Windows: 610mm x 610mm (2ft 0ins x 2ft 0ins)
- Door: 1765mm x 762mm (5ft 9ins x 2ft 6ins)
- Floor Cladding: 12mm
- Wall Cladding: 12mm
Select Your Options
The installation service is only available throughout mainland England, Wales and Scotland up to Edinburgh and Glasgow.
The installation team must have clear access to the site. They cannot carry buildings through your house or pass them over walls or fences due to insurance limitations.
Please note: It is your responsibility to prepare a suitable base prior to delivery of the building. Pressure treated bearers are available below as a suitable alternative to building a concrete or slabbed base. If you have any queries or concerns please do not hesitate to contact us on: 0121 355 7701 or email us at: email@example.com.
Pressure Treated Bearers
Pressure treated bearers are available as an alternative to building a concrete or slabbed. base. If you select this option along with the installation service you must ensure that the ground is level, clear of obstructions and well compacted.
FREE Mainland UK Delivery*
*These prices include delivery anywhere within mainland UK except for the Highlands of Scotland with the following postcodes; KW, IV, AB, PH, PL (With the exception of a 10 mile radius of Perth), PA (With the exception of Paisley and Greenock). These areas will be subject to a further cost.
Questions and Answers
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question
£367.50 inc. VATIn Stock