There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
Hozelock Bioforce Revolution 14000 Pressurised Pond Filter
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: 1354 EAN: 5010646055161
The Hozelock Bioforce Revolution means that you do not have to open up the filter, take it apart and get your hands dirty when carrying out routine maintenance.
There are two outlets and one inlet, the outlets are to take water back into your pond and for waste. The switch located on the top of the filter allows you to switch between the two when you need to. When the switch is pointing to waste you just turn the winding handle and this will move the foam cubes inside, cleaning them out automatically, once the water is running clear out of the waste outlet turn the switch back to your pond.
When the winding handle is used the foam cubes contained inside will move around and the water moving past them will rinse them out, this then gets take out of the second outlet (waste outlet). After cleaning you will simply switch the divert switch back into it’s original position so the water goes back into your pond.
Hozelock Bioforce 14000 Specs
- For ponds up to 24000 litres / 6160 gallons without fish.
- For ponds up to 14000 litres / 3111 gallons with fish.
- 36 Watt PLL UVC lamp.
- 25-40mm inlet and outlets.
- Recommended pump size of 8000 litres / 1760 gallons per hour.
- Winding handle for cleaning and diversion valve.
- Kaldnes K3 filter media and foam cubes.
- Dimensions including handle: 420mm diameter x 650mm height.
*Additional delivery charges may apply to the following destinations: Isle of Wight, Isles of Scilly, Northern Ireland, Republic of Ireland and Scottish Highlands. Please contact us for a customised delivery quote.
Questions and Answers (1)
Would this filter work well with the Hozelock 12000 pump? I know they recommend the 8000, although I want the pump to feed a waterfall which requires a flow rate of 10-12000 lph. My pond is only 11,000 litres.We Replied:
Dear Greg Thank you for your question. The recommended pump size is 8,000 litres per hour which is 4,000 litres less than the 12000 pump, I'd recommend that you install the Oase Y Distributor to redirect some of the flow around the filter to prevent damage to its seals: /Aquatics/Oase_Y_Distributor.htm. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Andy HobsonTuesday 29th, April, 2014
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question
£347.99 inc. VATIn Stock