Oase FiltoClear 13000 Pressurised Pond Filter

This powerful filter will provide crystal clear water for ponds that don't contain any fish up to 13000 litres in volume or ponds up to 7000 litres that do contain fish using Oase's patented filter system and UVC technology.

You will receive three grades of filter foam media to use with your filter: a coarse blue foam, a purple medium grade foam and a fine red foam to catch even the smallest of debris. By pulling the handle atop the filter, the foams will be squeezed clean ridding them of any sludge. Before pulling the handle, however, you should redirect the 2-way valve to the waste outlet instead of the pond return outlet. Full instructions are provided.

Also included with your unit is a 24 Watt ultraviolet clarifier (UVC). This is a small ultraviolet light that, when water passes by it, eliminates green water, algae and bacteria to further enhance the clarity and cleanliness of your pond water. This light can easily be replaced or taken out without having to dismantle or even turn off your filter system.

We recommend that you use this filter with the AquaMax Eco Premium 8000 as this pump sports a near perfect flow rate for this filter, or if not this one, any pump with a maximum flow rate of 9000 LPH. Both the filter and pump can be purchased together here as the FiltoClear 13000 set.

Due to its hardy exterior, you are able to partially bury the filter, up to the marked line that's detailed within the instructions, to not squander the aesthetics of your garden. You can further disguise the top of the buried filter using the FiltoCap rock cover which can be added to your order from the options below. Once buried the return pipe can be raised above the ground to provide a flow of water back to your waterfall, stream or pond.

The inlet/outlet/waste outlet of the filter takes 38mm/50mm (1 1/2"/2") pipe which doesn't come supplied but the connections (hosetails) and fittings do.

Key Features

Specification

PDF Downloads

Oase FiltoClear 13000 Instructions