There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
Oase Biosmart 30000 (Biotec 10.1)
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: 56641 EAN: 4010052566412
The Oase BioSmart 30000 flow through pond filter is ideal for both beginners or experienced pond keepers, being easy to set up and maintain and providing excellent filtration.
With cleaning handles on your foams for convenient maintenance, and the integrated sludge drain enables you to remove any debris from the bottom of your filter after cleaning.
A temperature display so you can keep a check on the water temperature of your pond at all times and use the correct fish food.
- Dimensions 770 x 555 x 405mm.
- Net weight 10.3kg.
- Guaranteed for 3 years.
- 4 blue coarse foams, 4 red fine foams, 1 green foam.
- Inlet size 25, 32, 38mm.
- Outlet DN75mm.
- For ponds up to 30,000 litres without fish.
- For ponds up to 15,000 litres with fish.
The great thing about this filter is that you can bury this filter slightly so long as the outlet is higher than your pond surface level. The use of outlet hose enables you to situate the filter away from the pond.
Upgrade to a BioSmart Set by choosing from the options below, this will give you both an optimal pump and UVC unit also. This filter can be combined with the Oase Bitron 24W or 36W UVC clarifiers which are sold separately and may be added below.
*Additional delivery charges may apply to the following destinations: Isle of Wight, Isles of Scilly, Northern Ireland, Republic of Ireland and Scottish Highlands. Please contact us for a customised delivery quote.
Questions and Answers (3)
HELLO COULD YOU PLEASE LET ME KNOW THE OUTLET SIZE ON THE BIOSMART 30000 AND WHAT THE HEIGHT IS FROM THE GROUND? AS I WILL BE REMOVING A BIOTEC 10.3 FILTER SYSTEM AND I WONDER IF I WILL HAVE ANY PROBLEMS CONNECTING TO MY EXISTING OUTLET. MANY THANKS MARKWe Replied:
Dear Mark Thank you for your question. The outlet size on this filter is 70mm and the distance from the bottom of the filter to the bottom of the outlet is 18cm. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Dan EvertonSunday 14th, June, 2015
I'm building a new pond with a gravity fed Eazypod filter. I'm thinking of adding the Oase BioSmart 30000 to the system. Presumably it would be connected to the outlet of the Eazypod then the UV and the pump pulling clear water. So I'd think of putting the Biotec besides the Eazypod then the pump water out of the system and making the gravity feed work. Is this correct?We Replied:
Dear Joe Thank you for your question. We would suggest running this filter independently to the eazypod as mixing gravity and pump fed systems does not work well. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Dan EvertonTuesday 02nd, August, 2016
What is the difference between a Biosmart 30000 and a Biotech 36000 and a Biotech 10.1 which all look very similar?We Replied:
Dear Ricky Thank you for your question. The Biosmart 30000 and the Biotech 10.1 are the same filter. The difference between the 30000 and 36000 is the capacity, the 36000 is suitable for ponds up to 36000 litres and the 30000 will only handle up to 30000 litres. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Dan EvertonSunday 04th, December, 2016
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question