TMC V2 Pure 50 Reverse Osmosis System

Product Code: 5851

Write the first review


Capable of producing up to 190 litres / 42 gallons of RO water per day.*

With an integral pressure gauge, flow restrictor and manual flush valve. This unit is compact with a space-saving design and a wall mounting bracket.

Complete with a self-piercing water connector, drain clamp, 6 metres of 1/4" RO flexible tubing and a filter housing.

A three stage professional system:

  • Sediment Pre-Filter.
  • Activated Carbon Block Filter.
  • High Quality TFC RO Membrane.

*Capacity dependant on your water pressure.



May We Also Suggest

  • V2 Pure TDS Monitor for Reverse Osmosis Systems - (5857)

    V2 Pure TDS Monitor for Reverse Osmosis Systems
    An in-line digital TDS monitor which measures and provides a highly accurate 'real-time' display of total dissolved solids levels before and after water passes through your RO system. This provides you with a visual indication of the RO unit's performance. 'Real-time' calculation of TDS removal rate with a removal rate indicator. When the TDS remove rate is above 80% the LED glows green and if it drops blow 80% it will glow red. A dual, 3 digit LCD display with a backlight, easy to use quick-connect fittings for simple installation and a selectable monitoring mode - battery saving or continuous. Requires 1 x long-life 3v lithium battery (CR2032) which is included.
  • V2 Pure Activated Carbon Block Cartridge - (5862)

    V2 Pure Activated Carbon Block Cartridge
    A 10" activated carbon block cartridge for removal of contaminants such as chlorine and colourants from the water without releasing carbon fines. Designed to fit the V2 Pure Reverse Osmosis Systems. For water applications only, do not use where the water is micro-biologically unsafe or of unknown quality. This cartridge will not remove chemicals or disinfect the water.
  • V2 Pure Sediment Cartridge (5 Micron) - (5863)

    V2 Pure Sediment Cartridge (5 Micron)
    A 10" micron polypropylene filter cartridge for removal of sand, silt, dirt and rust particles from your water. Designed to fit the V2 Pure Reverse Osmosis Systems. Allows high flow rates with minimum pressure drops, a high contanimant retention time and a long life span. Maximum water temperature 65 degrees centigrade.
  • V2 Pure De-Ionising Pod - (5861)

    V2 Pure De-Ionising Pod
    This de-ionising pod helps to remove the last unwanted compounds from your water. An RO unit will normally remove approximately 98% of particles from your water, using this add on will help to remove the remainder for you. Designed to be used with the V2 Pure Reverse Osmosis Systems.

Delivery Information

FREE Mainland UK* Delivery on orders over £40.00.
or £4.95 Delivery on Orders Under £40.00.
£6.95 Next Working Day Delivery.

 *Additional delivery charges may apply to the following destinations: Isle of Wight, Isles of Scilly, Northern Ireland, Republic of Ireland and Scottish Highlands. Please contact us for a customised delivery quote.

Customer Reviews

There are currently no reviews for this product. Please help us and others by writing a review.

Review This Product

Questions and Answers (1)

Aleksandra Asked:

Are filter cartridges and TDS meter included?

We Replied:

Dear Aleksandra Thank you for your question. The filter cartridges are included but the TDS meter has to be purchased separately at a cost of £39.99: /Aquatics/V2_Pure_TDS_Monitor_for_Reverse_Osmosis_Systems.htm Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Dan Everton

Saturday 27th, February, 2016

Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.

Ask us a Question