Reverse Osmosis Systems and Spares

An in-line digital TDS monitor which measures and provides a highly accurate 'real-time' display of total dissolved solids levels before and after water passes through your RO system. This provides you with a visual indication of the RO unit's performance. 'Real-time' calculation of TDS removal rate with a removal rate indicator. When the TDS remove rate is above 80% the LED glows green and if it drops blow 80% it will glow red. A dual, 3 digit LCD display with a backlight, easy to use quick-connect fittings for simple installation and a selectable monitoring mode - battery saving or continuous. Requires 1 x long-life 3v lithium battery (CR2032) which is included.

Capable of producing up to 190 litres / 42 gallons of RO water per day. With an integral pressure gauge, flow restrictor and manual flush valve. This unit is compact with a space-saving design and a wall mounting bracket. Complete with a self-piercing water connector, drain clamp, 6 metres of 1/4" RO flexible tubing and a filter housing.

Capable of producing up to 285 litres / 63 gallons of RO water per day. With an integral pressure gauge, flow restrictor and manual flush valve. This unit is compact with a space-saving design and a wall mounting bracket. Complete with a self-piercing water connector, drain clamp, 6 metres of 1/4" RO flexible tubing and a filter housing.

Capable of producing up to 380 litres / 84 gallons of RO water per day. With an integral pressure gauge, flow restrictor and manual flush valve. This unit is compact with a space-saving design and a wall mounting bracket. Complete with a self-piercing water connector, drain clamp, 6 metres of 1/4" RO flexible tubing and a filter housing.

A 10" activated carbon block cartridge for removal of contaminants such as chlorine and colourants from the water without releasing carbon fines. Designed to fit the V2 Pure Reverse Osmosis Systems. For water applications only, do not use where the water is micro-biologically unsafe or of unknown quality. This cartridge will not remove chemicals or disinfect the water.

A 10" micron polypropylene filter cartridge for removal of sand, silt, dirt and rust particles from your water. Designed to fit the V2 Pure Reverse Osmosis Systems. Allows high flow rates with minimum pressure drops, a high contanimant retention time and a long life span. Maximum water temperature 65 degrees centigrade.

This de-ionising pod helps to remove the last unwanted compounds from your water. An RO unit will normally remove approximately 98% of particles from your water, using this add on will help to remove the remainder for you. Designed to be used with the V2 Pure Reverse Osmosis Systems.

1/4 Inch Ball Valve for the TMC V2 Pure Reverse Osmosis System, allows for restricting or stopping flow in line. Part 5892. EAN 5027656234110.