Cloverleaf Sludge Answer 1 Litre

Sludge Answer is a unique blend of beneficial bacteria to convert and remove sludge from the pond and filter system.

The accumulation of sludge within a pond or filter system means far more than an unhealthy sight, when such deposits will not only erode important saturated oxygen levels but also become a detrimental breeding ground for nasty pathogenic bacteria.

Using nature's natural range of bacteria, Cloverleaf’s Sludge Answer is the safe answer to biologically removing sludge and dead algae, thus creating a cleaner pond and less filter maintenance, whilst promoting a sounder pond environment for the fish to enjoy.

Sludge Answer is designed for frequent use throughout the year on established ponds, however it is also a first class product when used on a new immature pond, and will greatly assist in obtaining filter maturity.

Sludge Answer Usage

For existing ponds with bad sludge problems it is recommended that in the early stages of applying "Sludge Answer" it should be ideally supported with Cloverleaf’s Oxygen Answer - especially if the pond does not have a mechanical air pump of substance.

For new or problematic ponds "Sludge Answer" should be added at the rate of 200cc per 1000 litres of pond water, with follow up doses (every 28 days or as required) at the rate of 100cc per 1000 litres. The product should be mixed with 3 litres of pond water, and applied over the pond surface and to the filter system using a watering can. (Note: Mark a watering can for "Pond Use" only). UV clarifiers should be turned off for the first 24 hours of application.

Amount of Treatment

1 litre bottle will treat ponds up to 5,000 litres (30ml treats 150 litres).