There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
Bermuda Fountain Pond Pump 2000
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: BER0253 EAN: 5060512210071
Yet another marvellous Bermuda pond pump to power fountains, waterfalls, cascades or used in conjunction with a filter.
Ideal to create great effects in a small pond, the Bermuda 2000 Fountain Pump is supplied with three fountain head attachments including spray, bell jet and geyser.
Built to last, this is a tough pump that can run all day long, enlivening the pond and surrounds with lovely movement and the relaxing sound of flowing water.
Easily maintained and with a useful lifting handle, the Bermuda 2000 has a dual flow adjuster, connector, T-piece and telescopic extension pipe.
Bermuda 2000 Features:
- Compact & Versatile Design
- Suitable for Water Features, Fountains & Small Filters
- Foam-Free Filter Casing
- Includes Bell Jet, Foam Jet and 2/3 Stage Jet Fountain Heads
- Flow Rate: Up to 2000 Litres / 440 Gallons Per Hour
- Cable Length: 10 metres / 33 feet (unplugged)
- Power Consumption: 35W
- Max Height: 2.5m
- Dimensions: 228 x 118 x 143mm
- Guarantee: 3-Year Manufacturer's Guarantee
Fast Free Delivery within Mainland UK on orders over £60.00.
We offer free mainland UK delivery on orders over £60.00. Smaller orders under £60.00 are subject to a £6.95 delivery charge. Delivery will typically be made within 3 - 5 working days but may be extended during busy times of the year.
Extra charges will apply to certain locations for example Isle of Wight and Offshore Islands. In some cases we can even deliver outside the mainland e.g. Channel Isles and arrange the VAT element for you. In all instances please contact us today for a personalised quote.
We Can Offer Next Day Delivery for £9.95.
To meet our deadline for this service you must order before 11.00am to ensure delivery for the next working day. This excludes weekends and bank holidays.
I cannot remove the front cover to clean the filter and impeller. It moves at the top slightly but appears stuck at the bottom and I don't want to force it off and maybe break it. Have you any advice?We Replied:
Dear Chad Thank you for your question. The front cage is usually very tight to stop it falling off in the pond. To remove the cover it just requires a bit of force, there are no clips to be pressed, it will just pull straight off. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Paul IlsleyMonday 01st, June, 2015
Do you know what the sizes of the threads are on the T piece?We Replied:
Dear John, Thank you for your question. The inner thread going into the pump is 20mm. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind Regards Dan EvertonSunday 15th, November, 2015
I have a BER253 pump, ii's about 5 years old and hasn't had a lot of use but recently when switching it off it trips the power. A couple of people have suggested "it's the windings"? Does that sound likely and, if so, is it serviceable or will I need to replace it?We Replied:
Dear Stuart Thank you for your question. Unfortunately, the manufactures have gone out of business. the only internal part that can cause a fixable fault is the impeller shaft and blades breaking. If you take the front casing off and the well cover it will reveal the impeller. Remove this from the pump, hold the magnetic shaft in you hand and turn the blades. If they turn all the way around this is at fault, if they turn halfway and stop the impeller is ok. We would not recommend continued use if the unit keeps tripping and would suggest buying a replacement pump. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind Regards Dan EvertonTuesday 17th, May, 2016
I have a Bermuda Submersible Pump model Ber114 (AC 230v, 50Hz, 45w IPX8, Hmax 3.2 m) in my small fish pond for a waterfall effect. This has started to work at reduced flow. I have stripped the pump down and have found that the hollow plastic tube (which has a fan attached to one end,passes through the centre of a magnet and has a thin plastic rod from the end locking plate assembly passing through the centre) has snapped. Due to the break being rough there is sufficient torque to give output of water, just reduced. Is it possible to purchase a refurbishment kit to replace the broken items, or is it a new pump? As my model is over 10 years old what would you advise as a replacement?We Replied:
Dear Jim Moffat Thank you for your question. We are sorry to say that as Bermuda have gone out of business we are unable to get any replacements as the 2000 impellers are now sold out. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Dan EvertonSunday 07th, August, 2016
My Bermuda 253 pump is working beautifully but the plastic bit which screws into the hole at the top of the pump that connects to the plastic fountain and waterfall fitting has snapped. Can you help?We Replied:
Dear Alan Thank you for your question. Please follow this link to the appropriate spare: https://www.gardensite.co.uk/aquatics/bermuda-t-spares-2000-3000-models.htm Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Dan EvertonTuesday 21st, March, 2017
From where can I buy a new fountain head for my Bermuda 253?We Replied:
Dear Mark Thank you for your question. Please see the link below: https://www.gardensite.co.uk/aquatics/bermuda-medium-fountain-jet.htm Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Dan EvertonMonday 01st, May, 2017
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question