1.25 Inch Brass Gate Valve PN10

This 1.25 inch Gate Valve safely and easily stops, resumes or controls the flow of water passing through it using its ingenious but oh so simple design.

On top of the valve is a big red turning knob, depending on which way your turn this, a gate beneath will either raise or lower, allowing water to pass through or stopping it entirely respectively. However using this method you are able to control the flow of water passing through by choosing how far open you want the valve, if it is mostly closed but not fully, a lesser amount of water will flow through as there is not enough space, thereby lowering the flow rate.

This would prove useful in a plethora of applications such as plumbing, oil & gas, pharmaceuticals, automotive, manufacturing or simply as a flow adjuster to control the flow of water through a pump or filter.

1.25 Inch Gate Valve Features:

• Solid Brass Construction
• Bidirectional, Able to Manage Flow in Both Directions
• Narrow Gauge
• Avoids Water Hammer As It Closes in a Slow and Proportional Manner
• Thread Connections: Female/Female
• PN (Pressure Nominal): 10
• Expertly Manufactured in Italy

Dimensions:

• Length: 4.5cm
• Width: 4.8cm
• Height: 11.6cm

Dimensions are approximate and taken from the widest points excluding the knob.