0.75 Inch Brass Gate Valve PN10

This 0.75 inch Gate Valve has been constructed from solid brass and has a very clever design, allowing you to control water flow with the simple turning of a knob.

Running through the valve is a gate that can be lowered or raised by simply turning the red knob found at the top of the valve. Once raised, that maximum amount of water will flow through, when it is lowered, no water will pass through. However, you can control the flow of the water by lowering or raising the gate to suit your preference. For example, the perfect flow rate for you may be to have the gate half open.

This would prove useful in a plethora of applications such as plumbing, oil & gas, pharmaceuticals, automotive, manufacturing or simply as a flow adjuster to control the flow of water through a pump or filter.

0.75 Inch Gate Valve Features:

• Solid Brass Construction
• Bidirectional, Able to Manage Flow in Both Directions
• Narrow Gauge
• Avoids Water Hammer As It Closes in a Slow and Proportional Manner
• Thread Connections: Female/Female
• PN (Pressure Nominal): 10
• Expertly Manufactured in Italy

Dimensions:

• Length: 3cm
• Width: 3.9cm
• Height: 8.5cm

Dimensions are approximate and taken from the widest points.