YardMaster 10 x 8 ft Emerald Deluxe Metal Shed

Which length is the door on ?

Dear Brian Thank you for your question. The door is on the width which is 303cms (9ft 11ins). Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Nathan James Dodd

Does the roof have a translucent panel for light?

Dear Bernie Thank you for your question. Unfortunately, there is no translucent panel with this shed. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind Regards Gaby Hall

Can you tell me what the "base" option is that you can add on to this shed for £61.99? What preparation / type of base do we need to put down? If purchasing the base, could we put that on the lawn then build the shed on top?

Dear Nic Thank you for your question. The 'Metal Floor Frame Kit' raises the internal floor slightly (with the use of a wooden plywood sheet on top which can be found at your local DIY shop) so that the floor height inside is the same height as the door sill (the metal beam on the floor which the doors slide through to close). This makes it easier to move lawnmowers and scooters etc in and out of the shed without having to struggle to get them over the sill lip when taking them back out. Both with or without the floor accessory, we would not recommend building the shed on grass or soil as overtime the shed could move and slide with adverse weather conditions. Instead, we would advise on a slabbed or concrete base in which the shed gets bolted down onto, creating a hard standing and flat surface and which would also act as your shed floor if you don't wish to purchase the floor accessory. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards, Andy

I have a flat level flagged area. Is this a suitable base on which to erect this shed?

Dear Tony Thank you for your question. These sheds are designed to be installed on a hard standing surface such as paving slabs, bricked patio or a concrete base. The lip of the base frame inside the shed can then be bolted down to the floor with the included anchor kit, which helps to keep the shed sturdy and unable to move during heavy weather conditions. As long as your proposed base is similar to this, then it should be perfectly suitable to accommodate the shed. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. I hope that this information helps. Thank you for using our online Q&A system. Kind regards Andy

Can you connect two of these sheds together to make one?

Dear Geraldine Thank you for your question. In theory you could combine two of these sheds if yuu had the required tools and necessary DIY skills. However, we would caution against it as the shed is manufactured with specifications applicable to a freestanding single unit. Any modifications would compromise the integrity of the structure and also void the warranty. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Lauren

I have a concrete base already installed and you mention that it bolts down. I don't want rain water running inside the shed from the base, so do I need the internal floor base as well?

Dear David Thank you for your question. The internal floor does a great job at raising the internal floor, so any rain water seepage would not come into contact with whatever is stored inside. You could also use silicone, similar to what's used around baths, where the base frame of the shed meets the concrete base along any other joints, this would help to limit any water ingress, Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards, Lauren.