There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
The Oase Aquarius Universal 40000 pump is ideal for waterfalls, bubbling stones and large decorative fountains.
With easy mechanical regulation of the flow rate thanks to the integrated dial on the front of the pump.
Energy-efficient due to low energy consumption and ideal for commerical or very large domestic set ups.
Can be installed fully submersed or dry mounted if desired and frost proof up to - 20 degrees centigrade.
- Dimensions 461 x 234 x 293mm.
- Power consumption of 1000 watts.
- 10 metres / 33 feet of electrical cable.
- Net weight 19.7kg.
- Maximum flow rate of 40000 litres per hour / 667 litres per minute.
- Max head height 11 metres.
- Outlet size: 40 or 50mm.
Complete with an Oase 3 + 2 year guarantee which means you get a 3 year guarantee from your purchase date as standard but if you register your product with Oase for free they will extend the guarantee to 5 years from the purchase date.
Fast Free UK Delivery on orders over £60.00.*
Smaller orders under £60.00 are subject to a £4.95 delivery charge. Delivery will typically be made within 2 - 3 working days but may be extended during peak times.
We Can Offer Next Day Delivery for £7.95*
To meet our deadline for this service you must order before 11.00am to ensure delivery for the next working day. This excludes weekends and bank holidays.
*Extra charges or restrictions will apply to certain UK postcodes. These include parts of Scotland, The Highlands, Northern Ireland and offshore Isles. Please note Next Day delivery is not available to these locations. Please click here for a full list of postcode exclusions and contact us today for a personalised quote.
What is the best diameter pipe to use if I am pumping water up a gradual incline for 25 metres to run back down a stream and into the pond? Also, why do the instructions tell you to operate the pump for ten minutes against an almost closed pressure socket after the initial one hour immersion?We Replied:
Dear Paul Thank you for your question. To best answer this question we need more details. What is the total elevation that the water will be pumped to, and what is the width of the waterfall? Please email this information along with your original question to [email protected] and we can look into this for you. Regarding the closed pressure socket, I would suggest that this is just a test to ensure the pump has gone through its normal start up routine. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Dan EvertonMonday 06th, March, 2017
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question