There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
Blagdon 650 Auto Shut-Off Feature Pump
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: 1052559 EAN: 5015368052559
The Blagdon 650 auto shut-off feature pump has been specifically designed to run small water features both outdoors and indoors.
With an integrated auto sut-off, the pump senses when the water level is low and turns itself off to prevent internal damage.
Once the water level has returned back, the pump will turn itself back on and carry on as normal.
Designed to be as compact as possible, the water flow can be easily adjusted and there's a pre-filter cage to prevent clogging
Water Pump Features:
- Prevents Motor Burnout by Turning On/Off Depending On Water Level
- Reduced Cleaning and Blocking with Pre-Filter Cage
- Adjustable Water Flow
- Compact Stable Design
- Includes 3/8ins and 1/2ins Hose Fitting
- 3 Year Guarantee
- 50Hz / 230 Volt
- 10 Watts
- Max Flow Rate: 650 ltr/hr
- Max Water Feature: 60cm (24ins) High
- Max Pumping Height: 110cm (3ft6ins)
- IP68 Rated
*Additional delivery charges may apply to the following destinations: Isle of Wight, Isles of Scilly, Northern Ireland, Republic of Ireland and Scottish Highlands. Please contact us for a customised delivery quote.
Questions and Answers (4)
Can i use this pump for my water feature that has a round reservoir (60cm wide, 21cm deep with a capacity of 55-60 litres) or is the pump too strong, as I'm concerned that the pump may empty the reservoir too quickly?We Replied:
Dear Eric Thank you for your question. This is all dependent on the overall height of the feature. If it is any higher than 1 metre the flow on the pump will be very slow at around 160 litres per hour. The reservoir should hold enough water for the feature to work and if the flow is too strong you can adjust the flow to match. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Dan EvertonMonday 14th, March, 2016
Is the cable detachable and suitable to pull through a conduit for installation? Also, is there a plug at the end or is it set up for permanent connection?We Replied:
Dear Bjorn Thank you for your question. The cable is attached to the motor and cannot be removed. This product does not come with a plug as it is against EU regulations to supply pond equipment with a fitted plug. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Dan EvertonThursday 07th, April, 2016
What is the width, length and depth in cm?We Replied:
Dear Marc Thank you for your question. The pump is 13cm long, 8cm wide and 6.5cm high. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Dan EvertonMonday 30th, May, 2016
Is the pump powered by connecting to a standard plug?We Replied:
Dear Darren Thank you for your question. You are correct, this just fits onto a standard 3 pin plug. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Jack MooreWednesday 22nd, June, 2016
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question
£23.99 inc. VATIn Stock