Four Granite Copper Bowls Fountain Water Feature

Product Code: PWF0988AC EAN: 5060119855873

(4.9) Based on 6 Reviews

Description

A wonderfully quirky self-contained fountain with water flowing from bowl to bowl on its way to the reservoir at the base.

Low voltage lights make the water sparkle and bring the copper coloured granite style feature to life after dark. Suitable for use indoors or outside on your decking or patio, as the polyresin is very hardwearing and frost resistant.

Four Granite Copper Bowls Fountain Features:

Copper finished polyresin
Very durable
Low voltage lights
Low voltage pump
10 metres of electrical cable and plug

Copper Bowls Fountain Dimensions:

Height: 85cm (33ins)
Width: 44cm (17ins)
Depth: 41cm (16ins)
Weight: 23kg (51lbs)

We advise that you always drain water features during the winter to prevent the water inside freezing and damaging the feature.

The best way to protect your fountain is to use a protection cover.

Your Selected Options:

Buy now, pay later with PayPal Credit

Free mainland UK delivery*

FREE Delivery normally within 3 - 5 working days within the UK and the Rep. of Ireland

Select Your Options

Would You Like A Matching Cover?

with a Medium Protection Cover (ACFCM)

Height: 122cm (4ft) Diameter: 122cm (4ft)

£14.99

Your Selected Options:

Delivery Information

Fast Free Delivery within Mainland UK and Ireland for Orders over £40.00.
Smaller orders under £40.00 are subject to a £6.95 delivery charge. Delivery will typically be made within 3 - 5 working days but may be extended during busy times of the year. Extra charges will apply to certain locations for example Isle of Wight and Islands. In some cases we can even deliver outside the mainland e.g. Channel Isles and arrange the VAT element for you. In all instances please contact us today for a personalised quote.

Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.

For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.

For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.

Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.

Customer Reviews

Overall Rating 4.9 / 5 Based On 6 Reviews