There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
Foshan Stainless Steel Water Features
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: WSS0404 EAN: 5060282494855
Impressively innovative and with a striking appearance, the Foshan Stainless Steel Water Feature has five shining stainless steel columns rising from a jet black base.
The tubes are different heights and their polished surface sparkles even further when water flows over their surface in this self-contained feature.
This effect is enhanced by low voltage but very bright LEDs and the feature is perfect for a number of locations, as a focal point inside the home or on your patio.
- Fully self-contained
- Constructed from stainless steel
- Consists of steel tubes with differing heights
- Lit by LEDs
- Perfect for garden patio areas
- Suitable for both indoor and outdoor use
- Low maintenance required
- Low voltage means a lower running cost
- Easy installation with supplied instructions
- Complete with pump and 10m cable
- Height: 55cm (1ft 10ins)
- Width: 88cm (2ft 11ins)
- Depth: 55cm (1ft 10ins)
- Weight: 8.8kg (19lbs 6oz)
Fast Free Delivery within Mainland UK and Ireland for Orders over £40.00.
Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.
For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.
For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.
Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question