Potting Station by Rowlinson

Product Code: POTSTN EAN: 5013856015888

(3.7) Based on 1 Review


Everything a keen gardener requires is contained within the Rowlinson Potting Station. 

The steel work top, zinc coated for rust resistance, is perfect for potting while the shelf above can be used to locate the plants or store various gardening items.

Underneath there are handy hooks for the safe keeping of trowels, secateurs and other small tools.

And that's not all in a work station that combines practicality with the good looks of natural timber, below are large storage shelves to pack away those pots, boxes and bags that may otherwise clutter the floor.

Potting Station Features

  • Tongue & groove back and side panels
  • Steel work top, zinc coated for rust resistance
  • Two storage shelves under work top
  • High level shelf with five hooks underneath for hanging tools
  • Pressure treated to protect against rot
  • Natural timber finish
  • Easy assembly
  • Manufactured from quality FSC® softwood
  • Can be painted or stained if desired
  • Comprehensive instructions and all fittings included                                  

Potting Station Dimensions


  • Height: 1620mm (5ft 4ins)
  • Width: 1030mm (3ft 5ins)
  • Depth: 530mm (1ft 9ins)                                                        

With over 80 years' manufacturing knowledge and experience, Rowlinson takes its social and environmental responsibilities very seriously. Timber is Forest Stewardship Council Certified and complies with all current regulations on FSC sourcing. Products are manufactured to Quality Management System standards, accredited to ISO 9001:2008.                            

PDF Downloads

Potting Station Assembly Instructions

Delivery Information

Rowlinson Garden Products Logo

FREE delivery to mainland UK.* 

*Unfortunately, we cannot deliver any Rowlinson product anywhere outside of mainland UK.

Timber is a natural product and as such is susceptible to changes in temperature and humidity. Splitting and warping may occur which is perfectly natural and will not affect the strength or longevity or any guarantee given on the product. Timber sheds are treated with a non-toxic treatment during manufacture.

Customer Reviews

Overall Rating 3.7 / 5 Based On 1 Reviews

Delivery 5 / 5
Quality 3 / 5
Price 3 / 5

Let Down by Careless Manufacture of Some Parts

First the good bit. Rowlinson delivery was excellent. The assembled product is good and solid. But it was a major task. Other reviews on various sites mention the back panel falling apart. It was the same for me. Interestingly this panel had dried mud on the base despite being in a sealed package. On opening the package the panel bent and the tongue and groove fell apart. There were two causes. First the batons retaining the T&G were stapled and held with cheap panel pins. Secondly the batons were too long and had forced the tongue out of the groove. I was lucky that none of the tongues snapped off. I had to dismantle the back, remove pins and feeble staples, shorten batons, square it off and reassemble using screws to give it sufficient structural integrity to force (actually had to use a mallet) the back piece into the side piece rebates. This was a major pain and took up valuable time. Other niggles are that the rebates run the full length of the side panel legs and this is unnecessary. It reduces the material in the 4 feet making them more likely to split on any lateral movement. The thin metal table cover is a few mm too narrow leaving a slight gap and a few mm too deep causing a slight upward bulge when fitted.. The forward edge is sharp and needed to be covered in tape to reduce the hazard. While parts are predrilled, the holes are often too close to the wood edge and in any case they don't have a receiving hole in the main carcass so you end up drilling anyway. Do I regret buying? No. It is a solid piece that should last but I was angry that the back panel was so carelessly constructed and that despite previous reviews, over time, the parent company had done nothing to improve it. Frankly I expect better. It may help future purchasers to note that to build it took several hours and I needed a drill, a strong screwdriver, a tenon saw, a decent mallet to force back and sides together, a pencil, a tape measure, a spirit level and a supply of extra screws to reconstruct the back. It was not an easy job but it was worthwhile as I have a pretty decent bench now. Allow time for this job. Four hands would be a lot quicker than two.

By William Black.
23rd, August, 2016.

We Replied:

Good Day William, Thank you for your honest detailed review. I have to say we do not sell many of these as we do with other brands of potting benches but I certainly would not not have any concerns recommending this product as knowing the brand and the people who run it I would say the item you received has slipped through quality control checks and we would replace accordingly. Please feel free to give us a call should you need too, we are open 7 days a week. Kind Regards David.

Questions and Answers

Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.

Ask us a Question