5ft x 3ft Tool Store

(4.3) Based on 1 Review


So compact that it can fit into even the smallest garden, the 5ft x 3ft Tool Store is incredibly useful to tidy away valuable garden equipment.

Don't leave spades, forks and small hand tools out in the rain to deteriorate, it's a waste of money. Look after them and they'll repay you by lasting many more years in a tool store that's very practical, the door can position at either or both ends and the front, and there's ample space for all your garden tools. Very well made the tool store will also last a very long time and has zinc hinges and a D handle together with a lock and key.

Tool Store Features:

  • Very compact
  • Practical design
  • Zinc hinges and D handle
  • Lock & key
  • Tongue & Groove wall and floor cladding
  • Dip treated
  • All framing corners are rounded off

5ft x 3ft Tool Store Dimensions:

  • Nominal size: 5ft wide x 3ft deep (1.52m x 0.91m)
  • Framing: 38mm x 50mm (1½ins x 2ins)
  • Eaves: 1610mm (5ft 3ins)
  • Ridge: 1710mm (5ft 7ins)
  • Door: 1460mm x 762mm (4ft 9ins x 2ft 6ins)
  • Floor Cladding: 12mm
  • Wall Cladding: 12mm

Select Your Options

Delivery Options

  • with Standard Mainland UK Delivery

  • with Delivery to the Highlands of Scotland



  • with Installation (optional)


Door Position

  • Door Position 'A' in RIGHT HAND gable end.

  • Door Position 'E' in LEFT HAND gable end

  • Door Position in CENTRE of LOW front

  • Door Position DOUBLE DOOR upgrade in centre of low front.


  • Door Position in 'A' and 'E' in both ends of the building


Pressure Treated Bearers

  • with Pressure Treated Bearers (optional)


Delivery Information

FREE Mainland UK Delivery*

*These prices include delivery anywhere within mainland UK except for the Highlands of Scotland with the following postcodes; KW, IV, AB, PH, PL (With the exception of a 10 mile radius of Perth), PA (With the exception of Paisley and Greenock). These areas will be subject to a further cost.

Customer Reviews

Overall Rating 4.3 / 5 Based On 1 Reviews

Delivery 4 / 5
Quality 5 / 5
Price 4 / 5

WEll Finished

A really well finished tool store that has internal bracing on the door to stop any warping and batons on the corners so it looks very well finished. T& G cladding is also what I wanted as I do not want to replacing this building any time soon. Impressed. Delivery was somewhat elongated though TBH.

By Pat Grice.
26th, August, 2016.

Questions and Answers (2)

Paul Barber Asked:

I have a 3ft gap between the side of my house and my neighbour's 6 ft fence. Is it possible to make a pent roof shed 3 ft wide by 9 ft long with the door on the end?

We Replied:

Dear Paul Thank you for your question. Please have a look at this shed and see the options at the bottom of the page for door positions: /garden-sheds/9ft-x-3ft-tool-store.htm Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Marsha

Thursday 07th, April, 2016
Edwin Asked:

What is the width of the door opening? Is the door just cut in half vertically or is it any wider?

We Replied:

Dear Edwin Thank you for your question. The upgrade to a double door means that the store is cut straight down the middle with each of the doors being just under 2ft in width. I hope this makes sense and helps. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Lauren

Monday 09th, January, 2017

Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.

Ask us a Question

Your Selected Options:

£307.50 inc. VAT