There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
10ft x 3ft Tool Store
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
You don't need to be told that looking after your garden implements and equipment is good idea, and the best way is to invest in a tool store.
This one measures 10ft x 3ft with plenty of space inside for all types of tools both large and small. Usefully, you can position the door on whichever side is most appropriate, and even upgrade to double doors.
Extremely well made and very durable, the tool store has zinc hinges and D handle, and can be secured with a lock and key. It will fit neatly into the garden tidying your tools and protecting them.
Tool Store Features:
- Very compact
- Practical design
- Zinc hinges and D handle
- Lock & key
- Tongue & Groove wall and floor cladding
- Dip treated
- All framing corners are rounded off
10ft x 3ft Tool Store Dimensions:
- Nominal size: 10ft wide x 3ft deep (3.05m x 0.91m)
- Framing: 38mm x 50mm (1½ins x 2ins)
- Eaves: 1610mm (5ft 3ins)
- Ridge: 1710mm (5ft 7ins)
- Door: 1460mm x 762mm (4ft 9ins x 2ft 6ins)
- Floor Cladding: 12mm
- Wall Cladding: 12mm
Select Your Options
The installation service is only available throughout mainland England, Wales and Scotland up to Edinburgh and Glasgow.
The installation team must have clear access to the site. They cannot carry buildings through your house or pass them over walls or fences due to insurance limitations.
Please note: It is your responsibility to prepare a suitable base prior to delivery of the building. Pressure treated bearers are available below as a suitable alternative to building a concrete or slabbed base. If you have any queries or concerns please do not hesitate to contact us on: 0121 355 7701 or email us at: email@example.com.
Choose the positioning of your door from one of the following. NOTE The double door options are at an extra cost.
Pressure Treated Bearers
Pressure treated bearers are available as an alternative to building a concrete or slabbed. base. If you select this option along with the installation service you must ensure that the ground is level, clear of obstructions and well compacted.
FREE Mainland UK Delivery*
*These prices include delivery anywhere within mainland UK except for the Highlands of Scotland with the following postcodes; KW, IV, AB, PH, PL (With the exception of a 10 mile radius of Perth), PA (With the exception of Paisley and Greenock). These areas will be subject to a further cost.
Questions and Answers (1)
What is the maximum width of the roof of the 10ft x 3ft Tool Store, the pictures seem to show it overhanging past the 900mm width? Also are the sheds supplied with bases?We Replied:
Dear Andy Thank you for your question. The sheds come complete with a wooden floor but you will need to prepare a suitable base. Grass, chippings, soil, sand etc are not suitable, the ideal base is concrete, slabs etc. The roof in total is 10ft 3” x 3ft 3 ½”, this does not include the facias which would add another 12mm but are not a necessity. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Luke SinclairSunday 20th, April, 2014
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question