There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
18ft x 12ft Heavy Duty Pent Garden Shed
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
With such a large floor area and so well built, the 18ft x 12ft Heavy Duty Pent Shed will have many possible uses. It's a substantial building, secure and dry, with handsome shiplap cladding.
Its heavy duty nature is in some measure due to 50mm x 50mm framing and cross bracing, plus the other traditional techniques used in the shed's construction including the tongue and groove roof and floor.
Pins and staples don't make for heavy duty sheds, that's why coach bolts and galvanised nails are used. In addition, chipboard has been rejected and timber is present throughout.
Hall's have clearly used all their experience of garden buildings to construct a shed that's spacious and attractively presented.
The timber cladding is in the shiplap style and has been treated with an oil based preservative and there are three Georgian style windows that are eye catching as well as practical, with one opening to create extra ventilation.
With such a generously sized shed, double doors are a good option but you can stay with the standard single door if you so wish. They are braced for strength and fitted with zinc hinges and a rim lock.
Heavy Duty Pent Shed Features:
- Glazed with 3mm horticultural glass
- Shiplap cladding
- Tongue and groove roof and floor
- Joinery windows
- Zinc coated hinges
- Base coat treated with high quality preservative, with antifungal treatment
- Traditional coach bolt assembly (no pins or staples)
- Galvanised nails
- No chipboard
- High quality heavy duty roofing felt
- Rim lock and door knob
- All framing corners are rounded off
18ft x 12ft Heavy Duty Pent Shed Dimensions:
- Nominal size: 18ft width x 12ft depth (5.49m x 3.66m)
- Framing: 50mm x 50mm (2ins x 2ins)
- Eaves height: 1937mm (6ft 4ins)
- Ridge height: 2153mm (7ft 1in)
- Georgian windows: 610mm x 457mm (2ft 0ins x 1ft 6ins)
- Door: 1880mm x 914mm (6ft 2ins x 3ft 0ins)
- Floor Cladding: 12mm
- Wall Cladding: 12mm
Select Your Options
Please Choose Your Door Position
The installation service is only available throughout mainland England, Wales and Scotland up to Edinburgh and Glasgow.
The installation team must have clear access to the site. They cannot carry buildings through your house or pass them over walls or fences due to insurance limitations.
Please note: It is your responsibility to prepare a suitable base prior to delivery of the building. Pressure treated bearers are available below as a suitable alternative to building a concrete or slabbed base. If you have any queries or concerns please do not hesitate to contact us on: 0121 355 7701 or email us at: email@example.com.
Pressure Treated Bearers
Pressure treated bearers are available as an alternative to building a concrete or slabbed. base. If you select this option along with the installation service you must ensure that the ground is level, clear of obstructions and well compacted.
FREE Mainland UK Delivery*
*These prices include delivery anywhere within mainland UK except for the Highlands of Scotland with the following postcodes; KW, IV, AB, PH, PL (With the exception of a 10 mile radius of Perth), PA (With the exception of Paisley and Greenock). These areas will be subject to a further cost.
Questions and Answers
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question
£2,760.00 inc. VATIn Stock