There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
10ft x 6ft Security Pent Garden Shed
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Security Pent sheds are specifically designed and manufactured to protect your valuable goods including garden equipment and other items such as bicycles.
With the 10ft x 6ft version, Hall's have used all their experience to make the shed as secure as possible and minimise the chance of theft, whether planned or opportunistic.
High windows, that are narrow and internally glazed, hide the contents from view or alternatively they can be dispensed with entirely if you so wish if you choose the windowless option.
Framing at 12 inch intervals makes the structure, that uses tongue and groove timber, extremely robust and the door is equally as sturdy with bracing, security bolted zinc hinges and a padbolt protector for extra safety.
Security Pent Shed Features:
- Internally Glazed Security Window
- No Window Option
- Security Bolted
- Zinc Hinges
- Braced Door
- Padbolt Protector (padbolt not supplied)
- Tongue & Groove wall and floor cladding
- Dip treated
- All framing corners are rounded off
10ft x 6ft Security Shed Dimensions:
- Nominal size: 10ft wide x 6ft deep (3.05m x 1.83m)
- Framing: 38mm x 50mm (1½ins x 2ins)
- Eaves height: 1937mm (6ft 4ins)
- Ridge height: 2153mm (7ft 1in)
- Windows: 1220mm x 150mm (4ft 0ins x 6ins)
- Door: 1880mm x 762mm (6ft 2ins x 2ft 6ins)
- (50mm x 50mm fully framed) (2ins x 2ins fully framed)
- Floor Cladding: 12mm
- Wall Cladding: 12mm
Select Your Options
Please Choose Your Door Position
Select from the following;
The installation service is only available throughout mainland England, Wales and Scotland up to Edinburgh and Glasgow.
The installation team must have clear access to the site. They cannot carry buildings through your house or pass them over walls or fences due to insurance limitations.
Please note: It is your responsibility to prepare a suitable base prior to delivery of the building. Pressure treated bearers are available below as a suitable alternative to building a concrete or slabbed base. If you have any queries or concerns please do not hesitate to contact us on: 0121 355 7701 or email us at: firstname.lastname@example.org.
Narrow, high level security windows are supplied as standard. You may however request 'no windows' if you require an even higher level of security.
Pressure Treated Bearers
Pressure treated bearers are available as an alternative to building a concrete or slabbed base. If you select this option along with the installation service you must ensure that the ground is level, clear of obstructions and well compacted.
FREE Mainland UK Delivery*
*These prices include delivery anywhere within mainland UK except for the Highlands of Scotland with the following postcodes; KW, IV, AB, PH, PL (With the exception of a 10 mile radius of Perth), PA (With the exception of Paisley and Greenock). These areas will be subject to a further cost.
Questions and Answers (1)
How thick is the T+G on the walls of the shedWe Replied:
Dear Stan Thank you for your question. It is a nominal 16mm but 18mm is available if required at extra cost. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Nathan James DoddWednesday 02nd, December, 2015
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question
£778.43 inc. VATIn Stock