Mrs Angharad J. Owen Asked:
I am interested in your Side Entry Arch Gate. What wood is the gate made from and what is the finish i.e. pressure treated natural pine or has it been coated? Does this gate need to be painted/varnished after installation or treated with clear/coloured wood preservative such as Cuprinol spirit based preservative?
We Replied:
Dear Mrs Owen
Thank you for your question.
The Side Entry Arch Gate is made from natural pine and has been pressure treated so there is no requirement for it to be painted/varnished. However, you can if you wish.
Should you wish to contact us further or to place an order, please call us on 0121 355 7701.
Thank you for using our online Q&A system.
Kind regards
Nathan James Dodd
Wednesday 12th, February, 2014
Phil A Asked:
What colour is this gate?
We Replied:
Dear Phil
Thank you for your question.
The gate has a golden brown finish.
Should you wish to contact us further or to place an order, please call us on 0121 355 7701.
Thank you for using our online Q&A system.
Kind regards
Nathan James Dodd
Monday 28th, April, 2014
Susan faulkner Asked:
Has the rear of the gate got bars and cross braces?
We Replied:
Dear Susan
Thank you for your question.
The gate has a frame all the way around it and it has two X frames one at the top and one at the bottom of the gate.
Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system.
kind regards
Nathan James Dodd
Saturday 09th, May, 2015
A wilkinson Asked:
Are the gates nailed or screwed together from the back?
We Replied:
Dear Sir / Madam
Thank you for your question.
We would advise using screws with the below set:
www.gardensite.co.uk/Garden_Structures/with_Timber_Gates_Ironmongery.htm
Should you wish to contact us further or to place an order, please call us on 0121 355 7701.
Thank you for using our online Q&A system.
Kind regards
Zach Nicholson
Friday 29th, January, 2016
Daldeep Jaswal Asked:
This gate needs to fit into a brick archway. How high is the gate at the shoulders and can it be trimmed at the shoulders if need be?
We Replied:
Dear Daldeep
Thank you for your question.
The height at the shoulders is 1.75m.
We wouldn't recommend trimming but it can be planed.
Should you wish to contact us further or to place an order, please call us on 0121 355 7701.
Thank you for using our online Q&A system.
Kind regards
Lauren
Friday 01st, July, 2016
Kev Breen Asked:
Do you make to measure?
We Replied:
Dear Kev
Thank you for your question.
Unfortunately, we are unable to supply bespoke custom sized items. The Side Entry Arch Gate only comes in the standard size.
Should you wish to contact us further or to place an order, please call us on 0121 355 7701.
Thank you for using our online Q&A system.
Kind regards
Lauren
Thursday 10th, November, 2016
Have a question for this product?
Go ahead and ask us!
We try to reply within a few hours but it may take longer on some questions.