There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
Sorry this product has been discontinued. Hozelock Range
NEW Hozelock Bioforce 3000 Pond Filter
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: 1350 EAN: 5010646055031
Ideal for ponds up to 6000 litres if you have no fish and 3000 if you do, this filter comes with filter foam, Kaldnes K3 media and a UV clarifier to stop green water.
The 2-year guarantee which is included in the price you pay will give you peace of mind that you’re covered if anything goes wrong with the filter.
A built-in UV clarifier comes with a 9 watt PLS lamp already installed so you can start using your Bioforce 3000 straight away.
Hozelock Bioforce 3000 Filter Information
- For ponds up to 6000 litres (1320 gallons) with no fish.
- For ponds up to 3000 litres (660 gallons) with fish.
- 9 watt PLS UV lamp included.
- Filter dimensions: 412 x 383 x 292mm.
- Inlet/outlet size: 20-25mm.
- Cable length is 5 metres.
Due to its pressurised design water can be pumped to a higher exit point to create a beautiful waterfall. With three types of filtration: mechanical, biological and UV. Mechanical Filtration is performed by the water flow through the filter foams which are layered to give maximum surface area and make for much easier maintenance.
The Biological Filtration is done through Kaldnes K3 filter media which is scientifically proven in wide spread water purification processes. This media allows good bacteria to colonise onto the K3 consuming waste in the water leading to better water quality.
The built in Ultra-Violet Clarifier will eradicate green water suspended algae in your pond helping to keep it clear and looking great. Your Bioforce is also easy to clean, using the backflush system which will flush out debris from the filter, extending time between thorough foam cleaning.
*Additional delivery charges may apply to the following destinations: Isle of Wight, Isles of Scilly, Northern Ireland, Republic of Ireland and Scottish Highlands. Please contact us for a customised delivery quote.
Questions and Answers (3)
How do I know if my pond filter is working properly?We Replied:
Dear Joy Thank you for your question. If your filter is operating correctly you will find the water in the pool will be clear and not murky and free from algae. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Paul IlsleyMonday 27th, July, 2015
I bought this product with the Hozelock pump 4/5 years ago and I have run the unit all winter. After openng it for cleaning I found the glass tube to be full of water. After draining and drying the electrical compartment, is the UV safe to use, and do you think the problem is the two O Rings?We Replied:
Dear Raymond Thank you for your question. As long as the unit is properly dried out you can try a new bulb to see if the unit is viable for use. If it is, we would recommend purchasing a seals kit, we would also suggest looking at the quartz glass for any cracks or chips which could allow water in. The seals kit can be found on the link below: /Aquatics/Bioforce_Replacement_Seals_Kit_3000_5500_8000.htm Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Dan EvertonTuesday 15th, March, 2016
We have just cleaned our filter and replaced the bulb but are having difficulty in replacing the top of the unit. This is a pressure filter that fits in the ground, are there any special ways that the top fits?We Replied:
Dear Mr Gilkes Thank you for your question. You first need to ensure that the lid seal is properly aligned and not impeding the lid, also ensure that all clips are aligned before trying to secure the lid. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Dan EvertonMonday 25th, July, 2016
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question