There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
Sorry this product has been discontinued. Pond Paint & Sealant
iFill Pond Gap Filler
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: iFill EAN: 5019736710010
A rapid setting expoxy resin gap filler for large cracks and holes in your concrete pond.
Ideally applied at temperatures between 5 and 30 degrees centigrade.
- Easily Painted Over Once Set
- Repairs Cracks and Holes in just an Hour
- Safe for Aquatic Life
- 100% Waterproof after Setting
You will need to make sure that the area is clean, dry and all the holes/cracks are rubbed down. Remove any flaky or loose material.
Once the iFill paste is cured (about 60 mins) the repaired surface will be 100% waterproof.
*Additional delivery charges may apply to the following destinations: Isle of Wight, Isles of Scilly, Northern Ireland, Republic of Ireland and Scottish Highlands. Please contact us for a customised delivery quote.
Questions and Answers (4)
Can I use this product to fill gaps in a natural stone waterfall? Some of the stones are loose, so the waterfall is leaking. I need something which is safe to use with fish.We Replied:
Dear Linda Thank you for your question. The iFill Pond Gap Filler is suitable for filling cracks on a waterfall if it's natural stone. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Dan EvertonTuesday 24th, June, 2014
Is this product colourless? Do I need to paint it?We Replied:
Dear Mr Green Thank you for your question. The iFill starts as grey and will dry to a very light grey almost white colour. You don't have to paint this once it is cured as it is 100% waterproof. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Paul IlsleySaturday 13th, September, 2014
I have just moved into a house with a stone and concrete pond, it also appears to have a liner under the stone concrete surface. Its leaking and I want to fix it. The challenge is I live in Poland. The temperature range -35C to 35C. Please can you advise me 1) the best way to proceed 2) If you deliver to Poland or have a distributor in Poland?We Replied:
Dear Bernard Thank you for your question. We would recommend calling the manufacturers' product helpline on 01934 633000. Shipping to Poland will cost approximately £10. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Dan EvertonMonday 20th, April, 2015
Can you recommend a sealant to use where the rubber liner joins the printer stones, something that will bond to both surfaces?We Replied:
Dear John Thank you for your question. We would use an aquatic silicone, please follow this link for some suggestions: /Aquatics/Pond_Paint_and_Sealant/ Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Paul IlsleyMonday 03rd, August, 2015
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question