Kelkay Easy Fountain Small Protection Cover (4573)A protection cover will keep your fountain or water feature safe from frost and ice during the winter and keep it clean too. Ideal to prevent rain from getting into the feature and then freezing causing damage. Ideal for the Henri Studio range of fountains.
Sorry this product has been discontinued. Henri Studio
Henri Studio Europa Bubbler Water Feature
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: H5301F2LRU EAN: 5055066409965
This will create the tranquil sound of running water on your garden patio or decking, or wherever you situate it.
Ideal as a centrepiece due to its completely round design. the water will be pumped up through the centre part bubbling over back into its bottom bowl.
With an LED plume light included to light up your water as it bubbles out of the top.
Europa Bubbler Features:
- Complete with LED light.
- Transformer and Henri pump.
Europa Bubbler Dimensions:
- Height: 72cm
- Width: 48cm
- Depth: 48cm
- Weight: 62kg
May We Also Suggest
FREE Mainland UK* Delivery on orders over £40.00.
or £4.95 Delivery on Orders Under £40.00.
£6.95 Next Working Day Delivery.
*Additional delivery charges may apply to the following destinations: Isle of Wight, Isles of Scilly, Northern Ireland, Republic of Ireland and Scottish Highlands. Please contact us for a customised delivery quote.
With over 30 years experience Andrew is your direct contact for all of the Henri range of products. Contact him now via e-mail or telephone 0121 355 7701 to discuss your requirements.
This product is a part of the Henri Core Range and is held in stock within the UK therefore Delivery should normally be made within 7 working days from receipt of your order. All deliveries will be booked in first by the carrier.
There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
Questions and Answers (3)
Tony Reed Asked:
Please can you explain in more detail how to wire this water feature as the diagrams are very unclear.We Replied:
Dear Tony Thank you for your question. The cable for this item is first fitted through a rubber bung with metal plates that can be found at the bottom of the feature. This bung is then tightened with the screws located in each plate. The cable is now watertight and can be hooked up to an outside supply. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Dan EvertonSaturday 25th, April, 2015
Terry Wooden Asked:
I think the motor for my Henri bubbler fountain has failed. Are replacements available?We Replied:
Dear Terry Thank you for your question. The pump that came with the fountain is not available as a spare but we do stock a range pumps that would be a replacement, the one we recommend is a Bermuda 450 feature pump: /Aquatics/Bermuda_450_Feature_Pump.htm Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Paul IlsleyFriday 14th, August, 2015
DAVID SHAND Asked:
On my Henri Studio Europa Bubbler Water Feature only 3 of the 6 lights are working, what can I do?We Replied:
Dear David Thank you for your question. It sounds like the LED unit has developed a fault. We would recommend contacting the manufacturer direct on 01405 869333, depending on how long you have had the feature they may send out a new LED fixture. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Dan EvertonThursday 12th, May, 2016
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question