There are currently no reviews for this product. Please help us and others by writing a review.
Review This ProductSorry this product has been discontinued. Pot and Bowl Water Features
4 Bowls on Brick Wall Water Feature
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: PWF1083 EAN: 5060119859406



Delicate bowls of water flow into each other against a brickwork background, integral LEDs highlight the movement and texture of this portrayal to create a notable water feature.
Made from high quality finely detailed polyresin, wherever the feature is positioned, light and sound will be introduced. This is a piece that can be admired at all times of the day and into the evening.
4 Bowls on Brick Wall Features:
- Self-contained
- Durable polyresin
- Outdoor and indoor use
- Low voltage lights
- Low voltage pump
- 10 metres of electrical cable
Dimensions:
- Height: 87cm (34ins)
- Width: 44cm (17ins)
- Depth: 44cm (17ins)
- Weight: 20kg (44lbs)
Please view the video below to see the water feature working.
We advise that you always drain water features during the winter to prevent the water inside freezing and damaging the feature.
The best way to protect your fountain is to use a protection cover.
PDF Downloads
Fast Free Delivery within Mainland UK and Ireland for Orders over £40.00.
Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.
For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.
For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.
Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.
What is the best additive to use to keep the water looking clear and fresh?
We Replied:Dear Neil Thank you for your question. Please refer to our water treatments section: https://www.gardensite.co.uk/Aquatics/Water_Feature_Treatments/ Most of the treatments will work by killing off the algae to keep the water clear. Should you wish to contact us further or to place an order, please call us on 0121 355 7701. Thank you for using our online Q&A system. Kind regards Andy Hobson
Tuesday 03rd, June, 2014Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.
Ask us a Question