Virginia Driftwood Falls Water Feature

Product Code: PWFJ1653 EAN: 5060282495647

Write the first review

Video

Description

This natural driftwood effect water feature is a wonderful way to accentuate the beauty of your home or garden.

It is made from high quality polyresin which makes it sturdy yet lightweight and it is fully self contained so water is recycled throughout the feature.

When in use the water gets pumped to the top of the feature and as it pours down from each level it is lit by four LED lights, the fourth one being in the pool at the base.

Product Features:

Hand finished
Lit with white lights
Fully self-contained
Made from durable polyresin
Low maintenance and low running costs
Complete kit: water feature, pump, lights, low voltage transformer and instructions.

Product Specifications:

Height: 45cm
Width: 25cm
Length: 32cm
Weight: 7kg
Light(s): 4x Single LED's

Select Your Options

Would You Like A Matching Cover?

with a Small Protection Cover (ACFCS)

Height: 103cm (3ft 5ins) Diameter: 105cm (3ft 5ins)

£12.99

Delivery Information

Fast Free Delivery within Mainland UK and Ireland for Orders over £40.00.
Smaller orders under £40.00 are subject to a £6.95 delivery charge. Delivery will typically be made within 3 - 5 working days but may be extended during busy times of the year. Extra charges will apply to certain locations for example Isle of Wight and Islands. In some cases we can even deliver outside the mainland e.g. Channel Isles and arrange the VAT element for you. In all instances please contact us today for a personalised quote.

Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.

For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.

For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.

Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.