There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
Small Ribbed Jar Water Feature
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: GCK1506-AB EAN: 5060282492738
Looking every inch a classical Roman vase, the Small Ribbed Jar Water Feature boasts superb colour, an elegant shape and a surface that shines with the glaze created by water streaming over its sides.
The vase sits on what appears to be onyx stone but every aspect of this highly distinctive piece is crafted from fibreglass reinforced concrete, a durable lightweight material that is perfect for this type of ornamental piece.
LEDs are used to highlight the water as it bubbles from the top of the vase, no water supply is needed as the feature is self -contained and all the water is collected in a reservoir and returned.
You'll receive a low voltage transformer together with a ten metre cable, so the water feature can easily become a marvellous patio focal point or a notable addition to your interior design.
- Lit With LED Lights
- Fully Self Contained
- Constructed From Glass Reinforced Concrete
- Hand Finished
- Complete Kit Included
- Low Maintenance
- Low Voltage Transformer & Plug
- 10m Of Cable
- Height: 72cm (2ft 4ins)
- Width: 42cm (1ft 5ins)
- Depth: 42cm (1ft 5ins)
- Weight: 24kg
We advise that you always drain water features during the winter to prevent the water inside freezing and damaging the feature. The best way to protect your fountain is to use a protection cover.
Fast Free Delivery within Mainland UK and Ireland for Orders over £40.00.
Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.
For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.
For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.
Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question