Small Granite Three Bowl Fountain Water Feature

Product Code: PWF1168 EAN: 5060282490949

Description

A compact self-contained fountain which features three bowls with water pouring into each one. You'll love the effect that is created, especially when it is enhanced by LED lighting.

The granite finish is superb, made possible by high quality polyresin that is extremely resilient when positioned outdoors or inside. Lightweight, the fountain can be moved around to suit any location.

Small Granite Three Bowl Fountain Features:

Polyresin
Highly resilient
Low voltage lights
Low voltage pump
10 metres of electrical cable

Small Granite Three Bowl Fountain Dimensions:

Height: 49cm (19ins)
Width: 31.5cm (12ins)
Depth: 29cm (11ins)
Weight: 11kg (24lbs)

Please view the video below to see the water feature working.

We advise that you always drain water features during the winter to prevent the water inside freezing and damaging the feature. The best way to protect your fountain is to use a protection cover.

Delivery Information

FREE UK DELIVERY on orders £50.00 or more.
£4.95 delivery on orders under £50.00.

All orders are acknowledged with a written receipt of purchase and you will be contacted prior to delivery. Delivery will normally be made within 5 working days from receipt of your order, though this may vary throughout the season. Please contact us now if delivery time is critical. All Sizes are approximate and for guidance only. Additional Delivery costs may apply for certain locations for example Isle of Wight.

We have over 50 Years Experience in water gardening & one of the Largest Aquatic Centres in the UK. Open 7 days a week.

Important Safety Information on Water Features for Garden and Outdoor Use

This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.

For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.

For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.

Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.