There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
Seattle Slate Falls Water Feature
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: PWFH4577 EAN: 5060282495913
The Seattle Slate Falls Water Feature by Aqua Creations has been hand finished with great precision to form a realistic design that results in a beautiful water display.
This is a stand out feature not only because of its reasonable size but also because of its indented rock appearance, as though its shape has been carved out by water over time.
The flowing water shimmers from the light of three luminous LED lights that are integrated into three of the tiers. Having these lights included enhance the water itself as it gently cascades from tier to tier.
Included with the Seattle Slate Falls is a pump, lights and low voltage transformer.
- Hand finished
- Made from resin
- 10m Cable Length
- Lit with white lights
- Fully self-contained
- Suitable for indoor or outdoor use
- Low maintenance and low running costs
- Complete kit: water feature, pump, lights, transformer and instructions.
- Height: 69cm
- Width: 51cm
- Depth: 45cm
- Weight: 11kg
- Light(s): 3x Single LED's
Smaller orders under £40.00 are subject to a £6.95 delivery charge. Delivery will typically be made within 3 - 5 working days but may be extended during busy times of the year. Extra charges will apply to certain locations for example Isle of Wight and Islands. In some cases we can even deliver outside the mainland e.g. Channel Isles and arrange the VAT element for you. In all instances please contact us today for a personalised quote.
Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.
For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.
For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.
Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.
Questions and Answers
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question