There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
The Rio Grande River Falls Water Feature is moulded convincingly from polyresin, with lovely colour that replicates the appearance of mossy rocks over which water has flowed for some time.
It's solidly built with little maintenance required, and the feature to be enjoyed in the evening as much as during the day, with LEDs in the rock pools brightly lighting the crystal clear water flowing into each one.
Introducing extra interest to many different locations, no mains water supply is required as the water feature is self-contained and is supplied with ten metres of power cable, low voltage transformer and plug.
Rio Grande Features:
- Lit With LEDs
- Fully Self Contained
- Constructed From Durable Polyresin
- Hand Finished
- Complete Kit Included
- Low Maintenance
- Low Voltage Transformer & Plug
- 10m Of Cable
- Height: 99cm (3ft 3ins)
- Width: 117cm (3ft 10ins)
- Depth: 265cm (8ft 8ins)
- Weight: 108kg
We advise that you always drain water features during the winter to prevent the water inside freezing and damaging the feature. The best way to protect your fountain is to use a protection cover.
Fast Free Delivery within Mainland UK and Ireland for Orders over £40.00.
Smaller orders under £40.00 are subject to a £6.95 delivery charge. Delivery will typically be made within 5 - 7 working days but may be extended during busy times of the year. Extra charges will apply to certain locations for example Isle of Wight and Islands. In some cases we can even deliver outside the mainland e.g. Channel Isles and arrange the VAT element for you. In all instances please contact us today for a personalised quote.
Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.
For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.
For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.
Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question