There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
The Richmond Brick Cascade water feature by Aqua Creations is a fantastic addition to their range of Water Walls.
Hand-finished with a cool toned brickwork effect design, this feature is both contemporary and stylish.
Being self-contained, made from a durable resin, and mains powered, this feature has everything you need to introduce tranquil sounds and movement to your landscape.
As water cascades over the water blade integrated into the back wall, enjoy the sound of natural free-flowing water.
- Fully Self Contained
- Made From A Durable Polyresin
- Hand Finished
- Includes: Mains Powered Pump
- Includes: LED Lights
- Includes: 10m Cable
|Depth:||40cm (1ft 4in)|
|Height:||81cm (2ft 8in)|
|Power Cable Length:||10m|
|Width:||29cm ( 11.4in)|
Fast Free Delivery within Mainland UK and Ireland for Orders over £40.00.
Smaller orders under £40.00 are subject to a £6.95 delivery charge. Delivery will typically be made within 5 - 7 working days but may be extended during busy times of the year. Extra charges will apply to certain locations for example Isle of Wight and Islands. In some cases we can even deliver outside the mainland e.g. Channel Isles and arrange the VAT element for you. In all instances please contact us today for a personalised quote.
Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.
For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.
For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.
Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question