There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
Pouring Driftwood Pots Water Feature
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: PWF3512 EAN: 5060282496095
The Pouring Driftwood Pots is a water feature with excellent hand finished detailing.
Aqua Creations took on a unique design concept of combining antique pots with rustic driftwood and turned it into a stylish water feature that is over 3ft tall.
There are three warm white LED lights that introduce an extra sparkle into the water as it spills from pot to pot before the water gets pumped back to the top.
- Pump with 10m Cable Length
- Low voltage transformer and plug
- Made from polyresin and hand finished
- Low maintenance and low running costs
- Suitable for indoor or outdoor use (some splashing may occur)
- Length: 31cm
- Width: 27cm
- Height: 109cm
- Weight: 16.5kg
- Light(s): 3x LED Clusters
Important Covid-19 Update - Monday 1st June 2020
Delivery timeframes have been extended to up to 15 - 20 working days due to carrier restrictions during Covid-19 and excessive demand.
Smaller orders under £40.00 are subject to a £6.95 delivery charge. Delivery will typically be made within 5 - 10 working days but may be extended during busy times of the year. Extra charges will apply to certain locations for example Isle of Wight and Islands. In some cases we can even deliver outside the mainland e.g. Channel Isles and arrange the VAT element for you. In all instances please contact us today for a personalised quote.
Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.
For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.
For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.
Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question