There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
Otters Building Dam Water Feature
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: PWFW1911 EAN: 5060282492813
Perhaps not strictly true to life as otters aren't well known for their dam building, this is nonetheless a delightful water feature that is beautifully lit.
Made from durable polyresin that can be moulded and coloured so attractively, the cascading water really catches the eye during the day and is highlighted by LEDs in the evening.
Otters Building Dam Features:
- Suitable for outdoors and indoors.
- Fully self-contained reservoir
- 2 single LEDs
- Mains powered pump
- 10m cable
- 12 month warranty
Otters Building Dam Dimensions:
- Height: 64cm (25ins)
- Width: 48cm (19ins)
- Depth: 35cm (14ins)
- Weight: 13kg (29lbs)
£4.95 delivery on orders under £50.00.
We have over 50 Years Experience in water gardening & one of the Largest Aquatic Centres in the UK. Open 7 days a week.
Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.
For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.
For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of the pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.
Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.
Questions and Answers
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question