There are currently no reviews for this product. Please help us and others by writing a review.Review This Product
Offset Balance Bowls Water Feature
We are committed to Low Prices.
If you find any of our products on the price promise pages advertised, and in stock and immediately available, at any of our competitors we will endeavour to match the price.
Product Code: PWFD1081 EAN: 5060282490932
A self-contained fountain with bowls which give the effect that they are balancing as the water runs out of each one into the one below.
Made from polyresin that is both high quality and extremely durable, the Offset Balance Bowls water feature has a low voltage pump for low running costs and LEDs that introduce superb illumination.
Offset Balance Bowls Features:
- Polyresin construction
- Low voltage LEDs
- Low voltage pump with
- 10 metres of electrical cable
- Very durable
Offset Balance Bowls Dimensions:
- Height 100cm (39ins)
- Width 53cm (21ins)
- Depth 53cm (21ins)
- Weight: 26kg (57lbs)
We advise that you always drain water features during the winter to prevent the water inside freezing and damaging the feature. The best way to protect your fountain is to use a protection cover.
£4.95 delivery on orders under £50.00.
Important Safety Information on Water Features for Garden and Outdoor Use
This product should not be exposed to extreme weather conditions. It is our recommendation that the product is drained completely and covered during the winter or alternatively drained and placed indoors. The electrical cable is permanently connected and sealed in the pump body. If the supply cable is damaged the pump must not be used. It must be discarded.
For safety-All outdoor wiring MUST be installed and tested by a qualified electrician BEFORE connection to the mains. A Residual Current Device (RCD) also known as a Residual Current Circuit Breaker (RCCB) having a tripping current not exceeding 30mA must be installed in the supply circuit. A 3 amp fuse must be fitted in the supply circuit. This product must be earthed at all times.
For outdoor use the pump has to be permanently connected to the fixed wiring at the mains system other than by means of a plug and socket. If an extension cable is required this must be connected to the end of teh pump cable using a watertight cable connector. A means of disconnection from the supply having a contact separation of at least 3mm in all poles must be incorporated in the fixed wiring. Permanent installation to the mains supply must conform to the regulations of the local electricity authority and would include the use of a plastic or metal conduit to protect the cable.
Always disconnect the mains electricity supply whilst the equipment is being installed, repaired, cleaned, maintained and handled or while replacing light bulbs.
Questions and Answers
Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.Ask us a Question
£399.99 inc. VATIn Stock