Oase FiltoClear 12000 Pressurised Pond Filter - GardenSite.co.uk

Oase FiltoClear 12000 Pressurised Pond Filter

Product Code: 51245 EAN: 4010052512457

Write the first review

Oase FiltoClear 12000 Pressurised Pond Filter
Oase FiltoClear 12000 Pressurised Pond Filter
Oase FiltoClear 12000 Pressurised Pond Filter
Oase FiltoClear 12000 Pressurised Pond Filter
  • Oase FiltoClear 12000 Pressurised Pond Filter
  • Oase FiltoClear 12000 Pressurised Pond Filter
  • Oase FiltoClear 12000 Pressurised Pond Filter
  • Oase FiltoClear 12000 Pressurised Pond Filter

The FiltoClear 12000 is suitable for ponds up to 12,000 litres without fish or 6,000 litres with fish.

With an easy cleaning system where you use the switch on top of the unit to divert the flow away from your pond.

Once you have done this you then pull up the handle which will compact the foams inside, the flow of the water will clean the foams and send the dirty water through your waste hose.

Once the water begins to run clear again you can then turn the switch back pumping clean water through to your pond again.

Product Specification:

  • 18 watt PLL lamp
  • 5 metres of electrical cable.
  • Inlet/Outlet 38mm or 50mm on both.
  • Dimensions: 380mm Diameter x 510mm Height.
  • 3 Blue Foams and 2 Red Foams.
  • Net Weight 6.9kg.
  • Maximum Flow Rate of 8000 litres per hour.

2 + 1 Year Oase Guarantee which means that you will get an automatic 2 year guarantee and if you register your product with Oase this increases your guarantee up to 3 years.


Oase FiltoClear Pond Filter Video

Select Your Options

Filtoclear Pipe Upgrade

Filtoclear Pipe Upgrade (desprecial)

A set of three hosetails to allow you to use pipe from 20-50mm on your Oase Filtoclear as opposed to the standard 38mm fittings supplied.

Hose for Your Filter

Oase Heavy Duty Flexible Hose 38mm / 1 1/2"

Oase Heavy Duty Flexible Hose 38mm / 1 1/2" (37178)

Priced per metre, this hose will connect your pump and and filter together allowing water to be sent from the pond into the filter and back out. You will need hose from your filter back into the pond and also for the waste too.

Just select the amount you require in the box provided to the right. Pipe can be sold in half metres if required.

Your Selected Options:

Please select your options before you add to basket.

Select Your Options

£329.99 inc. VAT

RRP: £447.99

(Saving: £103.01)

Delivery Information

Fast Free Delivery within Mainland UK on orders over £60.00.
We offer free mainland UK delivery on orders over £60.00. Smaller orders under £60.00 are subject to a £6.95 delivery charge. Delivery will typically be made within 3 - 5 working days but may be extended during busy times of the year.

Extra charges will apply to certain locations for example Isle of Wight and Offshore Islands. In some cases we can even deliver outside the mainland e.g. Channel Isles and arrange the VAT element for you. In all instances please contact us today for a personalised quote.

We Can Offer Next Day Delivery for £9.95.
To meet our deadline for this service you must order before 11.00am to ensure delivery for the next working day. This excludes weekends and bank holidays.



Customer Reviews

There are currently no reviews for this product. Please help us and others by writing a review.

Review This Product
Questions and Answers (1)
b derrington Asked:

Will this set run a waterblade needing 51000lts, at least a 25mm pipe to the blade only a metre long from a filter, 1.5mtr 40 pipe from pump blade set at half metre from the pond surface? The pond is 3400 litres heavily stocked with fish. It is only 1.5 to the blade from the base of pond, so the filter is only half a metre from blade outlet.

We Replied:

Dear Sir / Madam Thank you for your question. The product you have asked the question about is just the filter please follow this link to the desired item: https://www.gardensite.co.uk/Aquatics/Oase_FiltoClear_12000_Pressurised_Pond_Filter_and_Pump_Set.htm You have stated a flow rate of 51000lph, i think this is a slight overestimate. This unit will deliver the desired flow rate but the connection coming of the filter is 1½ - 2 so the inlet on the blade must match that or it will create backpressure damaging the filter. Kind Regards Dan Everton

Sunday 10th, May, 2015

Have a question for this product? Go ahead and ask us! We try to reply within a few hours but it may take longer on some questions.

Ask us a Question

People Viewing This Product Also Viewed

Related Categories You May Like